Quick Start Guide

4/4
10 If you are installing the Cable Management Arm
(AR8129):
Align the plungers on the Cable Management Arm
with the holes on either side of the rear of the
Sliding Shelf.
Fasten the other end of the Cable Management Arm
to the vertical mounting rail according to the
instructions supplied with AR8129.
Note: You will be using the same screws that were
used in Step 4 to attach both Sliding Shelf and
Cable Management Arm to the enclosure.
Caution: Install the Cable Management Arm before
placing any equipment on the Sliding
Shelf.
Step Action Figure