Installation Guide

Page | 1

POLYURETHANE CROWN MOULDINGS INSTALLATION

TOOLS:

 Measuring tape

 Fine tooth saw & Mitre box or

compound mitre box

 Pencil

 Safety goggles

 Safety mask

 Hammer or finishing nailer

 Putty knife

 Coping saw

 Caulking gun

 Paint brushes

MATERIALS:

 Nails

 Polyurethane Crown moulding

 Premium Polyurethane

construction adhesive

 Painters Caulk

 Clean cloth or sponge

 High quality Acrylic latex or Oil

based paint

 220 grit sandpaper

SAFETY

Wear safety mask and goggles when cutting Crown polyurethane

mouldings.

WALL AND CEILING PREPARATION

Prior to installing Crown mouldings make sure walls and ceilings are

 dust free

 dry

 grease free

If needed, lightly sand and wipe surface with a damp cloth.

WORKING CONDITIONS

Before installing American Pro Décor’s Polyurethane Crown mouldings,

make sure mouldings and adhesives are placed at room temperature 24

hours before installation. This allows material to adjust to the temperature

of the room to avoid expansion or contraction.

The recommended room temperature to install mouldings is between 50°

to 95° Fahrenheit

PAGE 1
POLYURETHANE CROWN MOULDINGS INSTALLATION TOOLS:  Measuring tape  Fine tooth saw & Mitre box or compound mitre box  Pencil  Safety goggles  Safety mask  Hammer or finishing nailer  Putty knife  Coping saw  Caulking gun  Paint brushes MATERIALS:        Nails Polyurethane Crown moulding Premium Polyurethane construction adhesive Painters Caulk Clean cloth or sponge High quality Acrylic latex or Oil based paint 220 grit sandpaper SAFETY Wear safety mask and goggles when cutting Crown polyu
PAGE 2
PAINTING Mouldings can be painted either before installation or after. It is up to the installer. Use a high quality Acrylic Latex or Oil based paint. Mouldings are factory preprimed and ready to paint or faux finish. MEASURING AND CUTTING Polyurethane Crown mouldings should be cut ¼” longer when filling a gap. It would spring into place. We recommend using a carbide saw blade with 80 teeth or more.