Installation Guide

TOOLS and MATERIALS REQUIRED for INSTALLATION:
PREPARATION:
INSTALLATION:
• Our MDF screening panels are sold unfinished and may require sanding.
• Panels are produced in “landscape” [2 ft. high x 6 ft. wide]
• Make sure that your cabinets have a frame to attach and conceal the panel.
• Measure the inside of the cabinet or opening where the screening panel will be inserted.
• Cut the panel to size.
• The panel MUST BE PRIMED prior to painting.
• When painting the MDF screening panel, it is recommended to use a roller or spray paint. Using a paint brush is
more difficult and tends to cause brush marks.
• The MDF screening panel may be painted on both sides, if desired.
Once preparations are complete, the MDF screening panels can be nailed or glued to the cabinet wall.
American Pro Decor assumes no liability for improper installation.
2 ft. x 6 ft. MDF Screening Panel Saw Wood
Glue
Tape
Measure
Hammer
+ Nails
Spray Paint or
Paint + Roller
MDFMDF
Screening PanelsScreening Panels
SPRAY
PAINT