Installation Guide

DECORATIVE MDF PERFORATED SCREENING PANELS INSTALLATION

Things needed:

 2 ft High x 6 ft Wide MDF screening panel

 Saw

 Wood Glue

 Nails

 Measuring Tape

 Paint or Paint Spray

 Paint Roller

Prepare:

 MDF Screen Panels are sold NATURAL UNFINISHED. They might need some sanding.

 Panels are produced in “Landscape” position

 Measure the inside of the cabinet or opening where lattices will be inserted

 Make sure cabinets have a frame to attach and conceal panels

 Cut panels to desired size

 You MUST PRIME the panel before painting

 When painting the MDF panels, it is recommended to use a roller or spray paint. Using a paint brush

is more difficult and tends to cause brush marks.

 The MDF panel may be painted on both sides, if desired, for the have smooth surfaces

Install: Once finished, MDF Screen Panels can be glued on or nailed to Cabinet Wall.

American Pro Décor assumes no liability for Improper Installation.