Installation Guide

LATTICE PANEL INSERT INSTALLATION

AND WOOD FINISHING TIPS

Things needed:

 Lattice Inserts Panels

 Saw

 Wood Glue

 Nails

 Measuring tape

(see things needed for finishing below)

Prepare:

 Measure the inside of the cabinet or opening where lattices will be inserted

 Mark and cut the Lattice Panel to that specific size

 After cutting panels, make sure ends are sanded smoothly

Install:

 Panels can be glued or pin nailed through to the Cabinet frames.

PAGE 1
LATTICE PANEL INSERT INSTALLATION AND WOOD FINISHING TIPS Things needed:  Lattice Inserts Panels  Saw  Wood Glue  Nails  Measuring tape (see things needed for finishing below) Prepare:  Measure the inside of the cabinet or opening where lattices will be inserted  Mark and cut the Lattice Panel to that specific size  After cutting panels, make sure ends are sanded smoothly Install:  Panels can be glued or pin nailed through to the Cabinet frames.
PAGE 2
STAINING AND INSTALLING DECORATIVE WOOD Tools:          Paint Brush Rags Pre-Stain Wood Conditioner Oil or Acrylic-based Wood Stain Oil or Acrylic –based Polyurethane Sealer 120 Grit and 220 Grit Sandpaper Cheese Cloth towels Goggles Protective mask Prepare: Decide which Type of Stain to use. You could use either an Oil base or Acrylic based Stain. Whichever you decide, you will also be using the same type of Sealer to finish up the staining process.