Installation Guide

American Pro Decor assumes no liability for improper installation.

TOOLS REQUIRED

INCLUDED IN KIT

• Plumb Line

• Pencil

• Phillips Head Screwdriver

• 4mm Drill Bit

• Wrench

• Level

• Power Drill

• Tape Measure

A B

C D E

Door Roller Hardware x2

Anti-Jump Disk x2

Routed Door Guide x1

ST4.2x35 Screw x2

Anchor x2

INSTALLATION MANUAL FOR ADDITIONAL DOORS

ROLLER KIT

PAGE 1
FURNITURE ROLLER KIT INSTALLATION MANUAL FOR ADDITIONAL DOORS A B C D E INCLUDED IN KIT TOOLS REQUIRED A B C • Plumb Line • Pencil • Phillips Head Screwdriver • 4mm Drill Bit • Wrench • Level • Power Drill • Tape Measure D E Door Roller Hardware x2 Anti-Jump Disk x2 Routed Door Guide x1 ST4.2x35 Screw x2 Anchor x2 American Pro Decor assumes no liability for improper installation.
PAGE 2
INSTALLATION 2 1 Anti-Jump Disk [B] (x2) Door Roller [A] 5" Drill holes into the doors as indicated. Attach the roller straps [A]. Attach the anti-jump disks [B] to the doors. It is suggested that the roller strap [A] be mounted 5" from the edge of the door to the neck of the roller. 3 Anti-Jump Disk [B] (x2) Attach the doors to the rail and lock the anti-jump disks [B] into position. Doors should be routed beforehand if using the routed door guide [C].