Installation Guide

American Pro Decor assumes no liability for improper installation.
5"
INSTALLATION
1
Drill holes into the doors as indicated. Attach the roller straps [A].
It is suggested that the roller strap [A] be mounted 5" from
the edge of the door to the neck of the roller.
Attach the anti-jump disks [B] to the doors.
2
Door Roller [A]
Anti-Jump Disk [B]
(x2)
Attach the doors to the rail and lock the anti-jump disks [B] into position. Doors should be routed
beforehand if using the routed door guide [C].
3
Anti-Jump Disk [B]
(x2)
If using the routed door guide [C], install at this time.
4
Routed Door Guide [C]