Instructions / Assembly

READ THESE INSTRUCTIONS THOROUGHLY BEFORE INSTALLING.

• Products are made with real wood presenting various designs and shades for a beautifully rich nish. Each plank

is unique to give the decor a warm and natural look.

• Wood Pine Planks can be installed on any structurally sound, clean, dry and at surface.

• Wood Pine Planks are NOT to be installed as ooring. The product must be used on interior walls only.

• Apply a minimum of one coat of primer sealer to cement block, plaster and gypsum surfaces prior to installation.

• Self adhesive wood wall planks are not recommended to be used in areas where the temperature can exceed

122° F (e.g. near a replace) nor in rooms that can become damp (e.g. a bathroom, shower room). Wood Pine

Planks must be installed in areas where the humidity level remains between 40% and 60%. The wood should rest

atly in its box at room temperature for at least 72 hours before installation.

• To ensure a consistent and natural result, mix the content from all the boxes prior to beginning installation.

WOOD

Pine Planks

With Peel & Stick Adhesive

PAGE 1
WOOD Pine Planks With Peel & Stick Adhesive READ THESE INSTRUCTIONS THOROUGHLY BEFORE INSTALLING. • Products are made with real wood presenting various designs and shades for a beautifully rich finish. Each plank is unique to give the decor a warm and natural look. • Wood Pine Planks can be installed on any structurally sound, clean, dry and flat surface. • Wood Pine Planks are NOT to be installed as flooring. The product must be used on interior walls only.
PAGE 2
TOOLS and MATERIALS REQUIRED for INSTALLATION. Level Dry Cloth Pencil Hand Saw + Miter Box Tape Measure Rubber Roller Hammer + Finishing Nails PREPARATION • Installation steps may vary according to the desired look. Systematically plan the layout, design, and the amount of wood necessary to complete the wall before beginning installation. • Self-adhesive wood wall planks adhere to several surfaces such as plasterboard (unpainted, primed or painted), concrete, plywood, or plaster walls.