Instructions / Assembly

READ THESE INSTRUCTIONS TOROUGHLY BEFORE INSTALLING

Products are made with real wood presenting various designs and shades for a beautifully rich finish. Each plank is unique

to give the decor a warm and natural look.

Wood Pine Planks can be installed on any structurally sound, clean, dry and flat surface.

Wood Pine Planks are NOT to be installed as flooring. The product must be used on interior walls only.

Apply a minimum of one coat of primer sealer to cement block, plaster and gypsum surfaces prior to installation.

Self adhesive wood wall planks are not recommended to be used in areas where the temperature can exceed 122° F (e.g.

near a fireplace) nor in rooms that can become damp (e.g. a bathroom, shower room).

Wood Pine Planks must be installed in areas where the humidity level remains between 40% and 60%.

The wood should rest flatly in its box at room temperature for at least 72 hours before installation.

To ensure a consistent and natural result, mix the content from all the boxes prior to beginning installation

American Pro Decor assumes no liability for improper installation 1 / 2

PAGE 1
READ THESE INSTRUCTIONS TOROUGHLY BEFORE INSTALLING Products are made with real wood presenting various designs and shades for a beautifully rich finish. Each plank is unique to give the decor a warm and natural look. Wood Pine Planks can be installed on any structurally sound, clean, dry and flat surface. Wood Pine Planks are NOT to be installed as flooring. The product must be used on interior walls only.
PAGE 2
PREPARATION Installation steps may vary according to the desired look. Systematically plan the layout, design, and the amount of wood necessary to complete the wall before beginning installation. Self-adhesive wood wall planks adhere to several surfaces such as plasterboard (unpainted, primed or painted), concrete, plywood, or plaster walls. Ensure that the surface to be covered is clean, dry, and smooth. Unevern areas must be adjusted.