Manual
EN
ENGLISH
Clarke
®
American Sanders Operator's Manual (EN) - Floorcrafter - 5 -
Introduction and Machine Specications
MODEL 07104A 56380917
Electrical Requirements
230~, 60Hz / 15.7 A, 3.7 kW 230~, 50Hz / 16.0 A, 3.0 kW
Sound Emisson (Lpm)
93.0 dB(A) 96.2 dB(A)
Vibration
<.15 in/s 2.88 m/s
2
rms
Motor
4 Hp Induction 3 kW Induction
Contact Wheel Rate
2450 rpm 2042 rpm
Abrasive Rate
4500 ft/min 3750 ft/min
Abrasive Size
29½” x 7
7
/
8
” 29½” x 7
7
/
8
”
Fan Flow Rate
234 CFM 195 CFM
Drum Settings
80 lbs., 70lbs., 60 lbs. 80 lbs., 70lbs., 60 lbs.
Overload Protection
Magnetic Circuit Breaker Magnetic Circuit Breaker
Electrical Cable
50’, 10-3 SJO LP-20P Plug 100’, 12-3 SJO AU2-15P Plug
Operating Controls
Adjustable Lever/Grip Adjustable Lever/Grip
Leveling Controls
Externally Adjustable Externally Adjustable
Operating Wheels
80 Durometer Clear Urethane 80 Durometer Clear Urethane
Weight
204 lbs. 204 lbs.
Dimensions
35 x 13
3
/
4
x 38
3
/
4
35 x 13
3
/
4
x 38
3
/
4
CAUTION: Your equipment may be inappropriate on some installations. Some softer woods used in oor-
ing cannot support the pressure created by hard wheels.
Always consult with the ooring manufacturer on the proper installation, preparation, and nish-
ing of their product. Determine suitability of your equipment in preparing the product.