Specification

ManualsBrandsAmerican Standard ManualsBathCornice Pedestal in White

J23

CORNICE

PEDESTAL SINK

VITREOUS CHINA

NOTES:

DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TRAPS

ARE SUGGESTED.

▼ PEDESTAL ANCHORING SCREWS NOT INCLUDED.

■ SUITABLE FOR REINFORCEMENT ONLY. ACTUAL DIMENSIONS MUST

BE TAKEN FROM FIXTURE.

FITTING NOT INCLUDED AND MUST BE ORDERED SEPARATELY.

PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.

INSTALLATION INSTRUCTIONS SUPPLIED WITH LAVATORY.

IMPORTANT: Dimensions of  xtures are nominal and may vary within the

range of tolerance established by ANSI Standard A112.19.2

These measurements are subject to change or cancellation. No responsibility

is assumed for use of superseded or voided pages.

To Be Speci ed:

❏ Color: ❏ White

❏ Faucet:

❏ Faucet Finish:

❏ Supplies:

❏ 1-1/4" Trap:

CORNICE PEDESTAL SINK

• Corner vitreous china lavatory and pedestal

• Twin front concealed over ows

• Rim slants toward basin for quick drainage

• Supplied with wall hanger

❏ 0611.400 Faucet holes on 4" (102mm) centers

(Illustrated)

❏ 0611.100 Center hole only

Nominal Dimensions:

394 x 394 x 845mm

(15-1/2" x 15-1/2" x 33-1/4")

Separate Components:

❏ 0611.004 Pedestal top - 4" (102mm) centers

❏ 0611.001 Pedestal top - Center hole only

❏ 0028-000 Pedestal base only

Bowl Sizes:

356mm (14") wide

305mm (12") front to back

165-178mm (6-1/2-7") deep

Compliance Certi cations -

Meets or Exceeds the Following Speci cations:

• ASME A112.19.2M for Vitreous China Fixtures

6/09

(178mm)

15-1/2"

(394mm)

11"

(279mm)

HANGER

ATTACH

HANGERS

FINISHED WALL

CENTER OF SLOT

ON HANGER

FINISHED WALL

FINISHED FLOOR

OUTLET

7-1/2"

(191mm)

18-1/2"

(470mm)

22"

(559mm)

(102mm)

2-1/4"

(57mm)

13-1/4"

(337mm)

29-3/4"

(756mm)

3-1/2"

(89mm)

12-3/4"

(324mm)

3-1/2"

(89mm)

10"

(254mm)

7-1/4"

(184mm)

9-1/4"

(235mm)

3/8" HOT

WATER

(10mm)

3/8" COLD

WATER

(10mm)

31"

RIM HEIGHT

(787mm)