Specification Sheet

J25
© 2017 AS America Inc.
spec_0445EdgmerePedSink4/17
EDGEMERE
®
PEDESTAL SINK
FINE FIRECLAY
EDGEMERE
®
PEDESTAL SINK
❏ 0445.800 Faucet holes on 8" (203mm) centers
❏ 0445.400 Faucet holes on 4" (102mm) centers
❏ 0445.100 Center hole only
 •Finereclay
 •Classicstyledrectangularpedestallavatory
 •Rearoverow
 •Suppliedwithmountingkit
 •RightHeight
®
forgreatercomfortduringuse
 •Faucetledgewithlargedeckarea(faucetnotincluded)
 •Design coordinates with Edgemere
®
Fixtures and Faucets
 •PedestaltopscanalsobeusedwithEdgemereConsoleTable
Nominal Dimensions:
25" x 19-1/2" x 35-5/8"
(635 x 495 x 905mm)
❏ 0445.008 Pedestal top-8" (203mm) centers
❏ 0445.004 Pedestal top-4" (102mm) centers
❏ 0445.001 Pedestal top-center hole only
❏ 0039.000 Pedestal only
❏ 8719.000 Console table
❏ 7720.018Optionaldecorativep-trapdrain(notshown)
Bowl sizes:
17-1/8" (435mm) wide,
12" (305mm) front to back,
5-1/4" (133mm) deep
Compliance Certications -
Meets or Exceeds the Following Specications:
•ASMEA112.19.2/CSAB45.1
To Be Specied:
❏ Color: ❏ White
❏ Console Finish: ❏ Chrome ❏BrushedNickel
❏ Faucet Finish:
❏ Supplies:
❏ P-Trap: ❏ Chrome ❏BrushedNickel
❏ Nipple:
*Seefaucetsectionforadditionalmodelsavailable
SEEREVERSEFORROUGHING-INDIMENSIONS