Installation Guide

3
730235-100 Rev. H
1
2
4
CAUTION: PRODUCT IS FRAGILE. TO AVOID BREAKAGE AND POSSIBLE INJURY HANDLE WITH CARE!
!
NOTE: Pictures may not exactly define contour of china and components.
INSTALLATION INSTRUCTIONS
Pedestal Sink
Introduction: Thank you for selecting our products...products which have been the benchmarks of
fine quality for years. To help insure that the installation process will proceed smoothly, please read
these instructions carefully before you begin. Also, review the recommended tools and materials
list; carefully unpack and examine your new plumbing fixture.
Adjustable Wrench
Channel Lock Pliers
Regular Screwdriver
Recommended Tools & Materials
Phillips Screwdriver
Pipe Wrench
Putty Kinfe
Drill
Saber Saw
Basin Wrench
Plumbers' Putty or
Caulking
Tubing Cutter
Tape
Measure
Hacksaw
© American Standard Inc. 2004
Provide suitable reinforcement behind
finished wall for lavatory hanger mounting
screws. *Determine horizontal center line
location of support from fixture.
NOTE: If replacing an existing sink be
certain to shut off water supply before
removing old sink.
Level
Hanger
Location
C/L of 2X6
Support
Finished
Floor
*
Mark lavatory and pedestal screw locations through the
mounting holes. If a steel hanger is supplied mark the location
of its screws when positioned as shown in step 5a.
Approx. Bumper
locations to raise
the lavatory slab
left side.
Top of Pedestal
Place lavatory and pedestal
into installed position. Level
and square the lavatory and
pedestal assembly. Use one
or more bumper cushions
(supplied) to level and
cushion lavatory slab to
pedestal.
For example only
Remove lavatory and pedestal from
installed position. Drill pilot holes for
lavatory and pedestal anchor screws
or lag bolts. Note: Some models are
supplied with lag bolts, anchor
screws, or steel hangers for lavatory
installations only. Other models and
all pedestals are not provided with
mounting hardware. Various pedestal
screw sizes and types are available
to the installer at local hardware
outlets.