Operating Guide

© 2003 American Standard Inc.
BS-24
CADET™
PEDESTAL SINK
VITREOUS CHINA
CADET PEDESTAL SINK
• Vitreous china lavatory and pedestal
• Rear overflow
• Fitting ledge with generous shelf area
• Supplied with mounting kit
❏ 0236.411 Faucet holes on 4” (102mm) centers
(Illustrated)
❏ 0236.811 Faucet holes on 8” (203mm) centers
❏ 0236.111 Center hole only
Nominal Dimensions:
24-1/2" x 19-3/4" x 35"
(622 x 502 x 889mm)
Separate Components:
❏ 0236.004 Pedestal top - 4” (102mm) centers
❏ 0236.008 Pedestal top - 8” (203mm) centers
❏ 0236.001 Pedestal top - Center hole only
❏ 731100-400 Pedestal base only
Bowl Sizes:
20” (508mm) wide,
12” (305mm) front to back,
6” (152mm) deep
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• ASME A112.19.2M for Vitreous China Fixtures
To Be Specified
❏ Color:
❏ Faucet:
❏ Faucet Finish:
❏ Supplies:
❏ 1 1/4” Trap:
Revised 10/02
102 mm
(4)
86mm
(3-3/8)
508mm
(20)
FINISHED
WALL
191mm
(7-1/2)
508mm
(20)
622mm
(24-1/2)
PEDESTAL
ANCHORING
SCREW HOLES
8 mm (5/16) DIA.
▼
REF.
244mm
(9-5/8)
305mm REF.
(12)
6mm
(1/4)
ANCHOR BOLT HOLES
25mm (1) DIA.
■
■
■
889mm
(35)
635mm
(25)
533mm
(21-1/2)
FINISHED
FLOOR
SUPPLIES AS
REQUIRED
8mm (5/16)
DIA. SCREW
HOLES
203mm
(8)
1-1/4 O.D.
WASTE
1-1/4 O.D.
TAILPIECE
203mm
(8)
203mm
(8)
178mm
(7)
*
*
PEDESTAL
SIDE SECTION
DRAIN
CHASE
OPEN
TO
FLOOR
NOTES:
✮ DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P” TRAPS ARE SUGGESTED.
▼PEDESTAL ANCHORING SCREWS NOT INCLUDED.
INSTALLATION INSTRUCTIONS SUPPLIED WITH LAVATORY.
■ SUITABLE FOR REINFORCEMENT ONLY. ACTUAL DIMENSIONS MUST BE TAKEN FROM
FIXTURE.
FITTING NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerance
established by ANSI Standard A112.19.2
These measurements are subject to change or cancellation. No responsibility is assumed for use
of superseded or voided pages.