Installation Guide

ManualsBrandsAmerican Standard ManualsBathroom Vanity TopsTown Square S 31-in Linen Vitreous China Bathroom Vanity Top

SAVE FOR FUTURE USE

7302365-100

CAUTION: PRODUCT IS FRAGILE. TO AVOID BREAKAGE AND POSSIBLE INJURY HANDLE WITH CARE!

Product names listed herein are trademarks of AS America, Inc.

NOTE: Pictures may not exactly define contour of china and components.

Town Square

0298 Series Washstand / Vanity Top

INSTALLATION INSTRUCTIONS

CARE AND MAINTENANCE

Thank you for selecting American Standard - the benchmark of fine quality for over 100 years. To ensure this product is installed

properly, please read these instructions carefully before you begin. (Certain installations may require professional help.) Also be

sure your installation conforms to local codes.

OBSERVE LOCAL PLUMBING AND BUILDING CODES

Recommended Tools & Materials

Town Square S Washstand Lavatory Town Square S Vanity Top Lavatory

9056030 Town Square S Washstand

Adjustable Wrench

Channel Lock Pliers

Regular Screwdriver

Phillips Screwdriver

Pipe Wrench

Putty Knife

Drill

Saber Saw

Basin Wrench

Plumbers' Putty or

Caulking

Tubing Cutter

Tape Measure

Hacksaw

Level

9-13/16"

(250 mm)

22-1/2"

(571 mm)

31"

(787 mm)

13/16"

(20 mm)

2-3/4"

(70 mm)

FAUCET MOUNTING HOLES:

SINGLE HOLE OR 8" (203 mm)

5-7/16"

(138 mm)

(178 mm)

31"

(787 mm)

35"

(889 mm)

23-5/16"

(592 mm)

10-15/16"

(277 mm)

25-9/16"

(650 mm)

18-1/8"

(460 mm)

22-3/8"

(568 mm)

31"

(787 mm)

FAUCET MOUNTING HOLES:

SINGLE HOLE

OR 8" (203 mm)

19"

(482 mm)

2-3/4"

(70 mm)

24"

(610 mm)

9-13/16"

(250 mm)

22-1/2"

(571 mm)

Summary of content (5 pages)

PAGE 1
INSTALLATION INSTRUCTIONS CARE AND MAINTENANCE Town Square® S 0298 Series Washstand / Vanity Top Thank you for selecting American Standard - the benchmark of fine quality for over 100 years. To ensure this product is installed properly, please read these instructions carefully before you begin. (Certain installations may require professional help.) Also be sure your installation conforms to local codes. ! CAUTION: PRODUCT IS FRAGILE.
PAGE 2
9056 WASHSTAND COMPONENTS LIST A ITEM # QTY. DESCRIPTION A B C 1 1 4 WASHSTAND GLASS SHELF SCREWS C B OPTIONAL TOWEL BAR PURCHASED SEPARATELY* Part Number 3829000 NOTE: Washstand comes fully assembled. Only the *Towel Bar and Glass Shelf need to be assembled. WASHSTAND ASSEMBLY 1 2 MOUNTING OPTIONAL TOWEL BAR: ADJUSTING LEVELING FEET: Place Washstand assembly into approximate installation position. Mount Towel Bar on the rear or back of the 2 front wooden legs of Washstand.
PAGE 3
WASHSTAND INSTALLATION 1 Wall Preparation for Washstand Installation C/L of 2 x 6 Support and Bracket Provide suitable reinforcement behind finished wall for Washstand mounting screws. 32" (813mm) Note: If replacing an existing sink be certain to shut off water supply prior to removing old sink. 2 Finished Floor Town Square S Washstand Preparation 1. Place Washstand into approximate installation position near wall. 2. Place a level on the Washstand and check in two directions.
PAGE 4
1 2 5 Vanity Top Installation: Using the template provided, locate the position of the sink on the above counter. Provide proper clearance under the countertop for the faucet supply lines, drain assembly and the structural parts of the cabinet. NOTE: If replacing an existing sink be certain to shut off water supply before removing old sink. Drill a clearance hole inside the perimeter line of the template for above counter installation.
PAGE 5
WASHSTAND CARE INSTRUCTIONS: Rinse the product clean with clear water. Dry with a soft cotton flannel cloth. DO NOT: Clean with soaps, acid, polish, abrasives, harsh cleaners, or a cloth with coarse surface. AS AMERICA, INC. BATHROOM FURNITURE LIMITED WARRANTY If inspection of this AS America, Inc.