Technical Specifications

J29
© 2017 AS America Inc.
TOWNSEND
®
ABOVE-COUNTER
RECTANGULAR SINK
FINE FIRECLAY
To Be Specied:
Color: White Linen
Faucet Finish:
Supplies:
1-1/4" Trap:
* See faucet section for additional models available
NOTES:
*
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TRAP ARE
SUGGESTED.
FITTINGS NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPAR AT ELY.
FOR COUNTERTOP CUTOUT AND INSTALLATION INSTRUCTIONS USE
TEMPLATE SUPPLIED WITH SINK.
IMPORTANT: Dimensions of xtures are nominal and may vary within the
range of tolerances established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided pages.
SUPPLIES
AS REQ'D
1-1/4" O.D. WASTE
1-1/4" O.D. TAILPIECE
FINISHED FLOOR
FINISHED WALL
31"
(787mm)
SUGGESTED
7-1/8"
(181mm)
2-3/16"
(55mm)
24"
(610mm)
2-11/16"
(67mm)
9-1/16"
(230mm)
18"
(457mm)
8"
203mm
*12-7/8"
327mm
*10-3/4"
273mm
FAUCET MOUNTING HOLES:
SINGLE HOLE, 4"(102mm)
OR 8"(203mm)
spec_0329TownsendAboveCtrRtgSink 4/17
TOWNSEND
®
ABOVE-COUNTER
RECTANGULAR SINK
0329.004 Faucet holes on 4" (102mm) centers
0329.008 Faucet holes on 8" (203mm) centers
0329.001 Faucet holes - center hole only (illustrated)
•Finereclay
•Rectangularabovecountersink
•Frontoverow
•Sinkhasglazedbackwall
•DesigncoordinateswithTownsend Collection
•Suppliedwithcut-outtemplate
Nominal Dimensions:
24" x 18"
(610 x 457 mm)
Bowl sizes:
16" (405 mm) wide
11" (280 mm) front-to-back
5" (128 mm) deep
Compliance Certications -
Meets or Exceeds the Following Specications:
•ASMEA112.19.2/CSAB45.1

Summary of content (1 pages)