Specification

J29
© 2017 AS America Inc.
TOWNSEND
®
ABOVE-COUNTER
RECTANGULAR SINK
FINE FIRECLAY
To Be Specied:
❏ Color: ❏ White ❏ Linen
❏ Faucet Finish:
❏ Supplies:
❏ 1-1/4" Trap:
* See faucet section for additional models available
NOTES:
*
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TRAP ARE SUGGESTED.
FITTINGS NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY.
FOR COUNTERTOP CUTOUT AND INSTALLATION INSTRUCTIONS USE TEMPLATE SUPPLIED WITH SINK.
IMPORTANT: Dimensions of xtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
SUPPLIES
AS REQ'D
1-1/4" O.D. WASTE
1-1/4" O.D. TAILPIECE
FINISHED FLOOR
FINISHED WALL
31"
(787mm)
SUGGESTED
7-1/8"
(181mm)
2-3/16"
(55mm)
24"
(69mm)
2-15/16"
(75mm)
9-1/16"
(230mm)
17-1/2"
(454mm)
8"
203mm
*12-7/8"
327mm
*10-3/4"
273mm
FAUCET MOUNTING HOLES:
SINGLE HOLE, 4"(102mm)
OR 8"(203mm)
SUGGESTED ADA INSTALLATION
BARRIER
FREE
CLEARANCE
25" MAX
(635mm)
34" MAX
(864mm)
4"
(102mm)
9" MIN
(229mm)
6" MAX
(152mm)
27" MIN
(686mm)
COUNTER TOP
8" MIN
(205mm)
11" MIN
(280mm)
spec_0329TownsendAboveCtrRtgSink Rev. A 5/17
TOWNSEND
®
ABOVE-COUNTER
RECTANGULAR SINK
❏ 0329.004 Faucet holes on 4" (102mm) centers
❏ 0329.008 Faucet holes on 8" (203mm) centers
❏ 0329.001 Faucet holes - center hole only (illustrated)
 •Finereclay
 •Rectangularabovecountersink
 •Frontoverow
 •Sinkhasglazedbackwall
 •DesigncoordinateswithTownsend Collection
 •Suppliedwithcut-outtemplate
Nominal Dimensions:
24" x 17-1/2"
(610 x 454 mm)
Bowl sizes:
16" (405 mm) wide
11" (280 mm) front-to-back
5" (128 mm) deep
Compliance Certications -
Meets or Exceeds the Following Specications:
•ASMEA112.19.2/CSAB45.1
MEETS THE AMERICANS WITH DISABILITIES A
CT GUIDELINES
AND ICC ANSI A117.1 ACCESSIBLE AND USABLE
BUILDINGS AND FACILITIES - CHECK LOCAL CODES.
Install lavatory 864mm (34") from finished floor.
Lavatory installed 102mm (4") minimum from front edge
of countertop provides 686mm (27") knee clearance area.
BARRIER FREE