Specification
J24
© 2009 AS America Inc.
Revised 4/09
CELERITY
ABOVE-COUNTER VESSEL
VITREOUS CHINA
NOTES:
*
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TRAP ARE
SUGGESTED.
FITTINGS NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
FOR COUNTERTOP CUTOUT AND INSTALLATION INSTRUCTIONS USE
TEMPLATE SUPPLIED WITH SINK.
IMPORTANT: Dimensions of xtures are nominal and may vary within the
range of tolerances established by ANSI Standard A112.19.9M.
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided pages.
CELERITY ABOVE-COUNTER VESSEL SINK
❏ 0514.000
• Above-Counter Round Vessel Lavatory
• Vitreous china
• Spacious basin
• No overow
• No faucet holes
• Recommended faucet - One Vessel Faucet
2064.152 (faucet shown not included)
Nominal Dimensions:
432mm (17" dia.)
Bowl sizes:
102mm (4") height
Compliance Certications -
Meets or Exceeds the Following Specications:
• ASME A112.19.2M for Vitreous China Fixtures
REAR FAUCET
(4" MINIMUM)
8-1/2"
(216mm)
17"
(432mm)
ADHESIVE
BOND
COUNTERTOP
(BY OTHERS)
SUPPLIES
AS
REQUIRED
FINISHED WALL
CUT OUT
COUNTERTOP
8-1/2" DIA.
HOLE (216MM)
CHINAWARE
BASE 8-1/4"
Dia.(210mm)
8"
(203mm)
4"
(102mm)
31"
(787mm)
SUGGESTED
1-1/4" (32MM)
O.D. WASTE
*
12-7/8"
(327mm)
*
10-3/4"
(273mm)
FINISHED
FLOOR
1-1/4" O.D.
TAILPIECE
To Be Specied (Recommended):
❏ Color: ❏ White
❏ Faucet: ONE vessel faucet 2064.152
❏ Faucet Finish: Polished Chrome (002)
❏ Supplies:
❏ 1-1/4" Trap: