Installation Instructions

ManualsBrandsAmerican Standard ManualsBathCornice Corner Wall-Mount Bathroom Sink in White

SAVE FOR FUTURE USE

7301997-100 01/20

CAUTION: PRODUCT IS FRAGILE. TO AVOID BREAKAGE AND POSSIBLE INJURY HANDLE WITH CARE!

Product names listed herein are trademarks of AS America, Inc.

NOTE: Pictures may not exactly define contour of china and components.

0611 CORNICE

™

PEDESTAL SINK

INSTALLATION INSTRUCTIONS

CARE AND MAINTENANCE

Thank you for selecting American Standard - the benchmark of fine quality for over 100 years. To ensure this product is installed

properly, please read these instructions carefully before you begin. (Certain installations may require professional help.) Also be

sure your installation conforms to local codes.

OBSERVE LOCAL PLUMBING AND BUILDING CODES

Recommended Tools & Materials

Adjustable Wrench

Putty Knife

Channel Lock Pliers

Regular Screwdriver

Phillips Screwdriver

Drill

Basin Wrench

Plumbers' Putty or

Caulking

Tubing Cutter Tape Measure

Pipe Wrench

Hacksaw

Level

ROUGHING-IN DIMENSIONS:

28-3/4"

(730mm)

33-1/8"

(841mm)

(127mm)

17-3/4"

(451mm)

21"

(533mm)

C/L HANGER

OUTLINE OF

PEDESTAL

C/L OUTLET

ROUGH

CENTER OF SLOT

OF HANGER

3/8" (10mm)

COLD WATER

3/8" (10mm)

HOT WATER

C/L OUTLET ROUGH

C/L HANGER

3-1/2"

(89mm)

15-3/4"

(400mm)

11" (279mm)

11"

(279mm)

18-7/8"

(480mm)

(179mm)

5" (127mm)

7-1/4"

(184mm)

22-3/16"

(563mm)

11"

(279mm)

FINISHED FLOOR

(102mm)

Summary of content (3 pages)

PAGE 1
INSTALLATION INSTRUCTIONS CARE AND MAINTENANCE 0611 CORNICE™ PEDESTAL SINK Thank you for selecting American Standard - the benchmark of fine quality for over 100 years. To ensure this product is installed properly, please read these instructions carefully before you begin. (Certain installations may require professional help.) Also be sure your installation conforms to local codes. ! CAUTION: PRODUCT IS FRAGILE.
PAGE 2
1 Hangers provided with the lavatory should be mounted 11" (279mm) (Center of Slot of Hanger) from the corner and 28-3/4" (730mm) up from the floor on each wall. (reference ROUGHING-IN and FIGURE 2) Tighten the hanger, (center slot only) until they will support the lavatory leaving “play” for final adjustment later. Make sure hanger is in its highest position when snugging hanger. Set the lavatory in place.
PAGE 3
7 8 Place the lavatory on a thick layer of papers or drop cloth to protect it from scratches. Following manufacturer’s instructions, install faucet and drain assembly (not included). Be certain to apply a bead of sealing putty on the underside of the drain (if needed) (reference area A) in order to ensure a watertight seal between the lavatory and drain. Remove excess putty after installing drain on lavatory. Return the fitted lavatory to the installed position.