Specification

ManualsBrandsAmerican Standard ManualsBathStudio Linen Undermount Rectangular Bathroom Sink with Overflow

Studio

Under Counter Sinks

❏ 0614.000 Unglazed Rim

❏ 0614.300 Glazed underside

• Rectangular under counter mount sinks

• Made from vitreous china

• Unglazed rim

• Front overow

• Supplied with mounting kit and template

Nominal Dimensions:

19-3/4" x 13-3/4"

(502 x 350mm)

Bowl size:

18" (457mm) wide

12" (305mm) front to back

6-7/16" (164mm) deep

❏ 0618.000 Unglazed Rim

Nominal Dimensions:

23-5/8" x 16-5/8"

(600 x 422mm)

Bowl size:

21-1/16" (535mm) wide

14" (356mm) front to back

6-1/4" (159mm) deep

Compliance Certications - Meets or Exceeds the Following Specications:

• ASME A112.19.2M for Vitreous China Fixtures

• CAN/CSA B45 series

Studio

Under Counter Sinks

VITREOUS CHINA

To Be Specied:

❏ Color: ❏ White ❏ Bone ❏ Linen

❏ Faucet*:

❏ Faucet Finish:

❏ Supplies:

❏ 1-1/4" Trap:

* See faucet section for additional models available

spec_0614_StudioUnderctrSinks_Rev4 2/20

SEE REVERSE FOR ROUGHING-IN DIMENSIONS

BARRIER FREE

MEETS THE AMERICANS WITH DISABILITIES A

CT GUIDELINES

AND ICC ANSI A117.1 ACCESSIBLE AND USABLE

BUILDINGS AND FACILITIES - CHECK LOCAL CODES.

Install lavatory 864mm (34") from finished floor.

Lavatory installed 102mm (4") minimum from front edge

of countertop provides 686mm (27") knee clearance area.

Summary of content (2 pages)

PAGE 1
Studio® Under Counter Sinks BARRIER FREE VITREOUS CHINA Studio ® Under Counter Sinks ❏ 0614.000 Unglazed Rim ❏ 0614.300 Glazed underside • • • • • Rectangular under counter mount sinks Made from vitreous china Unglazed rim Front overflow Supplied with mounting kit and template Nominal Dimensions: 19-3/4" x 13-3/4" (502 x 350mm) Bowl size: 18" (457mm) wide 12" (305mm) front to back 6-7/16" (164mm) deep ❏ 0618.
PAGE 2
Studio® Under Counter Sinks VITREOUS CHINA BARRIER FREE FINISHED WALL OR SPLASHBACK A B 51mm (2") MIN. 83mm (3-1/4") A F CENTER-SET 1-1/16" (27mm) 4" (102mm) SPREAD 1-1/4" (32mm) 8" (203mm) CLIP MACH. SCREW REFER TO INSTRUCTIONS PROVIDED WITH KIT FOR ADDITIONAL INFORMATION G E SEALING COMPOUND *279mm (11") 22mm (7/8") 203mm (8") MIN. *203mm (8") 864mm (34") SUPPLIES AS REQ'D. 1-1/4" O.D. WASTE 38mm (1-1/2") 1-1/4" O.D.