How to Guide

J10
© 2009 AS America Inc.
FINISHED
WALL
483mm
(19)
610mm
(24)
73mm
(3)
203mm
(8)
221mm
(8-3/4)
254mm
(10)
178mm
(7)
13mm
(1/2) DIA.
HOLES FOR
ANCHOR BOLTS
902mm
(35-1/2)
760mm
(30)
OPEN
TO
FLOOR
*
636mm
(25)
*
591mm
(23-1/4)
170mm
(6-3/4)
203mm
(8)
SUPPLIES
AS
REQUIRED
DRAIN
CHASE
1-1/4 O.D.
WASTE
1-1/4 O.D.
TAILPIECE
FINISHED
FLOOR
817mm
(32-1/4)
PEDESTAL
SIDE SECTION
9-1/2mm (3/8)DIA.
BASE ANCHOR
SCREW HOLES
BOULEVARD
PEDESTAL SINK
VITREOUS CHINA
BOULEVARD PEDESTAL SINK
• Vitreous china
• Classic styled rectangular pedestal lavatory
• Rear overow
• Supplied with mounting kit
• Right Height
TM
for greater comfort during use
• Faucet ledge with large deck area
(faucet not included)
Design coordinates with Studio Cadet
®
3 Toilet
• Basin has at bottom to also allow use as an
above counter sink or a countertop sink (with
u-shaped cut out)
0641.800 Faucet holes on 203mm (8") centers
(Illustrated)
0641.400 Faucet holes on 102mm (4") centers
0641.100 Center hole only
Nominal Dimensions:
610 x 483 x 902mm
(24" x 19" x 35-1/2")
0641.008 Lavatory slab-203mm (8") centers
0641.004 Lavatory slab-102mm (4") centers
0641.001 Lavatory slab-center hole only
0010.000 Pedestal only
Bowl sizes:
432mm (17") wide,
318mm (12-1/2") front to back,
127mm (5") deep
Compliance Certications -
Meets or Exceeds the Following Specications:
• ASME A112.19.2 - 2008/CSA B45.1-08
NOTES:
*
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TRAPS
ARE SUGGESTED.
PEDESTAL ANCHORING SCREWS NOT INCLUDED.
SUITABLE FOR REINFORCEMENT ONLY. ACTUAL DIMENSIONS MUST
BE TAKEN FROM FIXTURE.
FITTING NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.
INSTALLATION INSTRUCTIONS SUPPLIED WITH LAVATORY.
IMPORTANT: Dimensions of xtures are nominal and may vary within the
range of tolerance established by ANSI Standard A112.19.2
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided pages.
To Be Specied:
Color: White Bone Linen Black
Faucet Finish:
Supplies:
1-1/4" Trap:
Nipple:
* See faucet section for additional models available
Revised 4/09

Summary of content (1 pages)