Installation Guide

730236-100 Rev. F
1
2
3
CAUTION: PRODUCT IS FRAGILE. TO AVOID BREAKAGE AND POSSIBLE INJURY HANDLE WITH CARE!
NOTE: Pictures may not exactly define contour of china and components.
INSTALLATION INSTRUCTIONS
Countertop Sink
Introduction: Thank you for selecting our products...products which have been the benchmarks of fine quality for years.
To help insure that the installation process will proceed smoothly, please read these instructions carefully before you
begin. Also, review the recommended tools and materials list; carefully unpack and examine your new plumbing fixture.
Adjustable Wrench
Channel Lock Pliers
Regular Screwdriver
Recommended Tools & Materials
Phillips Screwdriver
Pipe Wrench
Putty Knife
Drill
Saber Saw
Basin Wrench
Plumbers' Putty or
Caulking
Tubing Cutter
Tape
Measure
Hacksaw
Using the template provided,locate the position of the
sink. Provide proper clearance under the countertop
for the faucet supply lines, drain assembly and the
structural parts of the cabinet.
NOTE: If replacing an existing sink be certain to shut
off water supply before removing the old sink.
Perimeter
of template
Perimeter
of template
A
Drill a clearance hole
inside the perimeter
line of the template.
Cut opening around the
perimeter of the
template.
Mount the faucet and drain assembly (NOT
INCLUDED - INCLUDED ONLY WITH LAV TO
GO PRODUCT) on the sink following faucet
manufacturer's instructions. Be certain to apply a
bead of sealing putty on the underside of the drain
(Part "A") in order to ensure a watertight seal
between the sink and drain. Remove excess putty
after installing drain on sink.
!
Product names listed herein are trademarks of AS America, Inc.
© AS America, Inc. 2010