Specification

J60
BARRIER FREE
© 2011 AS America Inc.
11/10
STUDIO
®
CARRÉ
COUNTERTOP SINK
VITREOUS CHINA
COUNTERTOP
FINISHED
FLOOR
1-1/4"
O.D.
WASTE
1-1/4" OD
TAILPIECE
SUPPLIES
AS
REQUIRED
BARRIER FREE
CLEARANCE
8" MIN.
(203mm)
27" MIN.
(686mm)
9" MIN.
(229mm)
6" MAX.
(152mm)
24"
(610mm)
2"
(51mm)
34"
(864mm)
8"
(203mm)
2" MIN.
(51mm)
2-1/4"
(57mm)
9-3/4"
(248mm)
8"
(203mm)
10-3/4"
(273mm)
12-1/2"
(318mm)
3/4"
(19mm)
6-3/4"
(172mm)
FINISHED
WALL OR
BACKSPLASH
16-1/4"
(415mm)
32-3/4"
(854mm)
SUGGESTED
16-1/4"
(415mm)
32-3/4"
(834mm)
STUDIO CARRÉ COUNTERTOP SINK
• Square self-rimming countertop sink with
rectangular curved bottom bowl
• Made from vitreous china
• Rear overow
• Cutout template supplied
• Faucet ledge (Faucet not included)
• Shown with Topic 7038.801 Widespread Faucet
(Not included)
❏ 0642.008 Faucet holes on 8" (203mm) centers
(illustrated)
❏ 0642.001 Center hole only
Nominal Dimensions:
415 x 415mm
(16-3/8" x 16-3/8")
Bowl sizes:
320mm (12-1/2") wide
238mm (9-3/8") front to back
121mm (4-3/4") deep
Compliance Certications -
Meets or Exceeds the Following Specications:
• ASME A112.19.2-2008/CSA B45.1-08 for Vitreous
China Fixture
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES
AND ANSI A117.1 ACCESSIBLE AND USABLE
BUILDINGS AND FACILITIES - CHECK LOCAL CODES.
Install lavatory 864mm (34") from finished floor.
Lavatory installed 51mm (2") minimum from front edge
of countertop provides 686mm (27") knee clearance area.
NOTES:
*
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TRAP
ARE SUGGESTED.
FOR COUNTERTOP CUTOUT AND INSTALLATION INSTRUCTIONS USE
TEMPLATE SUPPLIED WITH SINK.
FITTINGS NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
SEALING COMPOUND SUPPLIED BY OTHERS.
IMPORTANT: Dimensions of xtures are nominal and may vary within the
range of tolerances established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided pages.
To Be Specied:
❏ Color: ❏ White
❏ Faucet*:
❏ Faucet Finish:
❏ Supplies:
❏ 1-1/4" Trap:
* See faucet section for additional models available