Specification
M12
© 2019 AS America Inc.
spec_0954-0955-0958 Murro Wall Hung w/EC Rev 8/18
MURRO
™
UNIVERSAL DESIGN
WALL-HUNG LAVATORY WITH EVERCLEAN
®
VITREOUS CHINA/ACRYLIC
MURRO WITH ACRYLIC SHROUD MURRO WITH VITREOUS CHINA SHROUD
NOTES:
● LOOSE KEY ANGLE STOPS, LESS WALL ESCUTCHEONS. SUPPLIES REQUIRED.
*
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TRAP ARE SUGGESTED.
SHROUD/KNEE CONTACT GUARD 0059.020 NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
■ SUITABLE FOR REINFORCEMENT ONLY, ACTUAL DIMENSIONS MUST BE TAKEN FROM FIXTURE.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.
INSTALLATION INSTRUCTIONS SUPPLIED WITH LAVATORY.
IMPORTANT:
These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
FAUCET HOLE SPREAD AND DIAMETER
A
B
4" (102mm)
Ø 31.8mm, 1-1/4" ± 1/8" (3mm)
8" (203mm)
Ø 35mm, 1-3/8" + 1/8" - 1/16" (+3mm/-1.5mm)
550 mm
(21-7/16")
200 mm
(7-7/8")
85 mm
(3-5/16")
(2) 54 mm (2-1/8")
DIA. PUNCH
FOR CONC. ARMS
102 mm
(3-15/16")
152 mm
(5-15/16")
102 mm
(3-15/16")
455 mm
(17-3/4")
65 mm
(2-9/16")
152 mm
(5-15/16")
565 mm
(22-1/4")
864 mm
(34")
743 mm
(29-1/4")
SIDE PROFILE
(ADA)
SEE CHART FOR
DIAMETER OF
FAUCET HOLES
B
A
168 mm
(6-9/16")
168 mm
(6-9/16")
Ø35 mm
(Ø1-3/8")
Ø15 mm
(Ø9/16")
265 mm
(10-5/16")
399 mm
(15-9/16")
420 mm
(16-9/16")
FINISHED FLOOR
FINISHED WALL
FINISHED WALL
FINISHED FLOOR
(6) 25 mm (1") DIA.
ACCESS HOLES
FOR CONC. ARMS
SIDE PROFILE
(ADA)
(2) 54 mm (2-1/8")
DIA. PUNCH
FOR CONC. ARMS
65 mm
(2-9/16")
152 mm
(5-15/16")
419 mm
(16-3/8")
864 mm
(34")
160 mm
(6-1/4")
Ø15 mm
(Ø9/16")
Ø15 mm
(Ø9/16")
399 mm
(15-9/16")
420 mm
(16-9/16")
127 mm
(5")
FINISHED FLOOR
743 mm
(29-1/4")
267 mm
(10-7/16")
FINISHED WALL
FINISHED FLOOR
550 mm
(21-7/16")
200 mm
(7-7/8")
85 mm
(3-5/16")
102 mm
(3-15/16")
152 mm
(5-15/16")
102 mm
(3-15/16")
455 mm
(17-3/4")
SEE CHART FOR
DIAMETER OF
FAUCET HOLES
B
A
168 mm
(6-9/16")
168 mm
(6-9/16")
Ø35 mm
(Ø1-3/8")
FINISHED WALL
(6) 25 mm (1") DIA.
ACCESS HOLES
FOR CONC. ARMS
FAUCET HOLE SPREAD AND DIAMETER
A
B
4" (102mm)
Ø 31.8mm, 1-1/4" ± 1/8" (3mm)
8" (203mm)
Ø 35mm, 1-3/8" + 1/8" - 1/16" (+3mm/-1.5mm)
BARRIER FREE