Installation & Assembly

ManualsBrandsAmerican Standard ManualsFarmhouse/Apron Kitchen SinksAvery Single Bowl 36" L x 20" W Farmhouse/Apron Kitchen Sink

- 1 -

INSTALLATION INSTRUCTIONS

SAVE FOR FUTURE USE

Product names listed herein are trademarks of AS America, Inc.

791598-101

RECOMMENDED TOOLS AND MATERIALS

Most of the procedures require the use of common tools and materials, which are available from hardware and plumbing

supply stores. It is essential that the tools and materials be on hand before work has begun.

REPLACEMENT USE

When replacing an original unit be sure to shut off water supply before removing the sink or disconnecting

water supply lines and drain ttings. Original supplies and shutoff valves should be replaced on installation.

SINK MODELS

MOUNTING OPTIONS

Thank you for selecting American Standard – the benchmark of ne quality for over 100 years. To ensure this product is installed

properly, please read these instructions carefully before you begin. (Certain installations may require professional help.) Also be sure

your installation conforms to local codes.

CAUTION: PRODUCT IS FRAGILE. TO AVOID BREAKAGE AND POSSIBLE INJURY HANDLE WITH CARE!

NOTE: Pictures may not exactly dene contour of china and components.

30" Sink model 1180SB3020SS

36" Sink model 1180SB3620SS

Avery

™

Stainless Steel

Kitchen Sinks

Adjustable Wrench

Channel Locks

Regular Screwdriver

Phillips Screwdriver

10'

Saber Saw

Pipe Wrench Level

Tubing Cutter

Square

Tape Measure

Electric

Drill

1 2 3 4 5 6 7 8 9 10 11

1 2 3 4 5 6 7 8 9 10

11 12 13 14 15 16 17 18 19 20 21 22 23 24

Hacksaw

Sealant

30" Model

No. 1180SB3020SS

36" Model

No. 1180SB3620SS

D: 20" (508 mm)

W: 30" (762 mm)

D: 20" (508 mm)

W: 36" (914 mm)

Flush Mount

Under Countertop

COUNTERTOP

Summary of content (6 pages)

PAGE 1
INSTALLATION INSTRUCTIONS Avery™ Stainless Steel Kitchen Sinks 30" Sink model 1180SB3020SS 36" Sink model 1180SB3620SS Thank you for selecting American Standard – the benchmark of fine quality for over 100 years. To ensure this product is installed properly, please read these instructions carefully before you begin. (Certain installations may require professional help.) Also be sure your installation conforms to local codes. ! CAUTION: PRODUCT IS FRAGILE.
PAGE 2
INSTALLATION PROCEDURES Typical installation includes cabinet support preparation, installation of faucet and waste fitting, connection of flexible water supply lines, attachment of sink to cabinet, sizing and installation of drain and water supplies. Sink Mounting Provisions The cabinet area beneath the sink must be reinforced to provide sufficient support. The wood support frame for the sink must support 400 pounds (approximate weight of sink when full and garbage disposal installed).
PAGE 3
2 SUPPORT FRAME Construct a support frame to fit inside the cabinet opening. Provide appropriate clearance for faucet, water supply lines, drain assembly, garbage disposal and structural parts of the cabinet. Flush Mount Installation Note: Install the support frame so that the top rim of the sink, when placed within the frame, will be level and flush with the top surface of the countertop. See diagram 2A below.
PAGE 4
3 SINK INSTALLATION CAUTION: Sinks are extremely heavy. For personal safety, always use extra personnel for installation. PLACE A THIN LAYER OF SEALANT AROUND TOP EDGE OF SUPPORT FRAME STEP 1. Carefully set the sink within the support frame and position in center of cabinet opening. Check clearance around sink apron and ensure sink is centered within cabinet opening. Ensure sink base is making proper contact with support frame and countertop.
PAGE 5
A APPLY SEALANT APPLY SEALANT THREE SIDES For Flush Mount Sinks: Clean the sink apron and top rim of all debris. Ensure that the surface on underside of countertop and around the countertop cutout opening is smooth and free of debris. Flush mount installation requires a generous bead of sealant around the sink apron where sink and countertop will meet. TOP OF CABINET 5B APPLY SEALANT APPLY SEALANT ON TOP THREE SIDES OF RIM For Under Counter Sinks: Clean the sink apron and top rim of all debris.
PAGE 6
8 INSTALL FAUCET Carefully locate and install faucet to countertop in accordance with manufacturer’s instructions. Ensure you provide adequate clearance for supply lines and faucet operation. Connect supply lines to shutoff valves. Turn on water supply valves and water-test installation. AS AMERICA, INC. LIMITED LIFETIME WARRANTY FOR STAINLESS STEEL KITCHEN SINKS If an AS America, Inc.