Installation Guide

ManualsBrandsAmerican Standard ManualsBathStudio S 24 in. Bathroom Vanity Sink Top with 8 in. Faucet Holes in White

SAVE FOR FUTURE USE

770279-100 Rev. 1 05/2020

CAUTION: PRODUCT IS FRAGILE. TO AVOID BREAKAGE AND POSSIBLE INJURY HANDLE WITH CARE!

NOTE: Pictures may not exactly define contour of china and components.

Product names listed herein are trademarks of AS America, Inc.

Studio

S - Drop-In Sink

Models 1296, 1297, 1298

INSTALLATION INSTRUCTIONS

CARE AND MAINTENANCE

Thank you for selecting American Standard - the benchmark of fine quality for over 100 years. To ensure this product is installed

properly, please read these instructions carefully before you begin. (Certain installations may require professional help.) Also be

sure your installation conforms to local codes.

OBSERVE LOCAL PLUMBING AND BUILDING CODES

RECOMMENDED TOOLS & MATERIALS

Adjustable Wrench

Channel Lock Pliers

Regular Screwdriver

Phillips Screwdriver

Pipe Wrench

Putty Knife

Drill

Jig Saw

Basin Wrench

Plumbers' Putty

or Caulking

Tubing Cutter

Tape

Measure

Hacksaw

Level

ROUGHING-IN DIMENSIONS: Model 1296

BARRIER

FREE

CLEARANCE

COUNTER TOP

34" MAX

(864mm)

27" MIN

(686mm)

6" MAX

(152mm)

9" MIN

(229mm)

25" MAX

(635mm)

3" MIN

(76mm)

8" MIN

(205mm)

1-1/4" O.D. WASTE

1-1/4" O.D. TAILPIECE

SUPPLIES

AS REQ'D

*8"

(203mm)

FINISHED WALL

FINISHED

FLOOR

FINISHED

FLOOR

FAUCET MOUNTING HOLE:

SINGLE HOLE

SUGGESTED ADA INSTALLATION

*10-3/4"

(273mm)

*12-7/8"

(327mm)

1-7/8"

(48mm)

(153mm)

4-5/8"

(117mm)

*31"

(787mm)

SUGGESTED

14"

(356mm)

22-1/2"

(572mm)

(178mm)

2" MIN (51mm)

1-1/2" MIN (38mm)

11" MIN

(280mm)

Summary of content (4 pages)

PAGE 1
INSTALLATION INSTRUCTIONS CARE AND MAINTENANCE Studio® S - Drop-In Sink Models 1296, 1297, 1298 Thank you for selecting American Standard - the benchmark of fine quality for over 100 years. To ensure this product is installed properly, please read these instructions carefully before you begin. (Certain installations may require professional help.) Also be sure your installation conforms to local codes. ! CAUTION: PRODUCT IS FRAGILE.
PAGE 2
ROUGHING-IN DIMENSIONS: Model 1297 FINISHED WALL FAUCET MOUNTING HOLES: SINGLE HOLE OR 8" (203mm) 3-1/2" (89mm) 2-7/16" (62mm) 10-13/16" (275mm) 25" MAX (635mm) 1-1/2" (38mm) COUNTER TOP 8" MIN (203mm) 20" (508mm) 24" (609mm) 34" MAX (864mm) 1-5/16" (33mm) 27" MIN (686mm) 4-7/16" (113mm) 6" (153mm) *10-3/4" (273mm) BARRIER FREE CLEARANCE *12-7/8" (327mm) *31" 787mm SUGGESTED SUPPLIES AS REQ'D 8" 203mm 6" MAX (152mm) 11" MIN (280mm) 9" MIN (229mm) 1-1/4" O.D.
PAGE 3
1 5 Drop-In Installation: Using the template provided, locate the position of the sink on the above counter. Provide proper clearance under the countertop for the faucet supply lines, drain assembly and the structural parts of the cabinet. NOTE: If replacing an existing sink be certain to shut off water supply before removing old sink. 2 Drill a clearance hole inside the perimeter line of the template for drop-in installation.
PAGE 4
AMERICAN STANDARD ONE-YEAR LIMITED WARRANTY If inspection of this American Standard plumbing product, within one year after its initial purchase, confirms that it is defective in materials or workmanship, American Standard will repair or, at its option, exchange the product for a similar model. This warranty does not apply to local building code compliance.