Dimensions Guide
Standard drilling: 3 hole -
15SB.252283.073
Optional drilling: 1 hole on center -
15SB.252211.073
Optional drilling: 4th hole on right -
15SB.252284.073
STAINLESS STEEL KITCHEN SINK 25 1/4"
❏
Drop-in Series
• 18 Gauge Stainless Steel
• 18-10 Chrome Nickel content
• Single bowl sink
• Installation hardware, template and instructions included
• Waste fittings included
• 27" cabinet required
Nominal Dimensions:
25 1/4" x 22" x 9"
Bowl Size:
23" wide
17" front to back
9" deep
Compliance Certifications:
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range
of tolerances established by ASME A112.19.3
These measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided leaflet.
25 1/4" [64cm]
23" [58cm]
22" [56cm]
17" [43cm]
© 2011 AS America Inc. 07/11
15SB.252283.073
Standard drilling:
3 hole
25 1/4" [64cm]
23" [58cm]
22" [56cm]
17" [43cm]
15SB.252211.073
Optional drilling:
1 hole on center
25 1/4" [64cm]
23" [58cm]
22" [56cm]
17" [43cm]
9" [23cm]
15SB.252284.073
Optional drilling:
4th hole on right
To Be Specified:
❏ 8241.121500.075 Stainless steel drainer basket
❏ 8443.101500.075 Stainless steel mesh colander
❏ 8445.211500.075 Stainless steel bottom grid