Specification

GENERAL DESCRIPTION:

Single function showerhead. Full spray pattern. Brass ball joint.

Easy clean spray nozzles. 2.5 gpm/9.5 L/min. maximum ow rate.

PRODUCT FEATURES:

Single Function: Showerhead provides drenching

spray for full coverage of the user.

Easy Clean Spray Nozzles: Easily clean lime and

calcium build up. Nozzles will not clog.

TOWNSEND

SHOWERHEAD

Revised 6/16

MODEL NUMBER:

❏ 1660.508 Townsend Showerhead

SUGGESTED SPECIFICATION

Showerhead shall have 1 spray pattern and brass ball joint. Fitting shall be American Standard Model # 1660.508.___.

6-1/8"

(156 mm)

1/2" NPT

PAGE 1
TOWNSEND® SHOWERHEAD MODEL NUMBER: ❏ 1660.508 Townsend Showerhead 1/2" NPT 6-1/8" (156 mm) GENERAL DESCRIPTION: Single function showerhead. Full spray pattern. Brass ball joint. Easy clean spray nozzles. 2.5 gpm/9.5 L/min. maximum flow rate. PRODUCT FEATURES: Single Function: Showerhead provides drenching spray for full coverage of the user. Easy Clean Spray Nozzles: Easily clean lime and calcium build up. Nozzles will not clog.
PAGE 2
TOWNSEND® SHOWERHEAD FLOW RATE CODES AND STANDARDS ASME A112.18.1 CSA B125.1 GALLONS PER MINUTE These products meet or exceed the following codes and standards: 3.0 2.5 2.0 1.5 1.0 0.5 0 20 40 60 80 100 INLET PRESSURE (PSI) Finishes Product Number 1660.508 Description Polished Chrome PVD Polished Nickel Legacy Bronze PVD Satin Nickel 002 013 278 295 Townsend ® Showerhead Only Showerhead Accessories Product Number Description 1660.240 Standard Shower Arm and Flange 1660.