Specification Sheet

L475
© 2015 AS America Inc.
FloWise
®
COMMERCIAL SHOWER SYSTEMS
1.5 GPM SHOWER SYSTEM KIT
WITH SLIDE-GRAB BAR, HAND SHOWER & DIVERTER TUB SPOUT
MODEL NUMBER:
1662SG.215 Commercial Shower System Kit
Includes:
• Shower Valve with SS R120SS
• Colony Soft Valve Only Trim T675.500.002
• 3-F Hand Shower 1660.766.002
with Pause Feature
• In-Line Vacuum Breaker 1660.400.002
• Metal Hose 8888.035.002
• Wall Supply 8888.037.002
• 36" Slide-Grab Bar 1662.236.002
• Slip-On Diverter Tub Spout 8888.026
FLOW RATE
GALLONS PER MINUTE
INLET PRESSURE (PSI)
0
1
2
3
10080604020
SUGGESTED SPECIFICATION:
Shower system shall feature a wall supply with 1/2" NPT female inlets and 1/2" NPSM male outlet, 59" metal hose, vacuum
breaker, 1.5 gpm/5.7L/min. 3-function water saving personal shower with pause feature, slip-on diverter tub spout and a 36"
slide-grab bar. Pressure Balance valve shall feature a cast brass body. Shall feature ceramic disc valve cartridge which
controls water temperature and volume. Shall also feature hot limit safety stop. Fitting shall be American Standard
Model # 1662SG.215.002.
6"
(153mm)
3"
(76mm)
6-3/4"
(171mm)
CODES AND STANDARDS
Install as required to comply with local code
requirements.
ASME A112.18.1
ASSE 1016
CSA B 125
ANSI A117.1
1662SG.215
Product
Number
Description
FloWise
®
Commercial Shower System Kit. Contains pressure balance valve with volume and
temperature control, trim kit, 3-function water saving hand shower with pause feature, metal hose,
vacuum breaker, slip-on diverter tub spout, wall supply and 36" slide-grab bar. 1.5gpm/5.7L/min.
Finish
Polished
Chrome
002
1/2 NOM.
COPPER
SWEAT ALL
CONNECTIONS
"SEE ILLUSTRATION BELOW"
32mm
(1-1/4")
13mm (1/2")
INLET:
1/2" NPT
1829mm (72")
to 1990mm (78")
(OPTIONAL)
TO FINISHED
FLOOR
RUBBER GASKET
FINISHED WALL
OUTLET:
1/2" NPSM HOSE
CONNECTION
53mm
(2-1/16")
51mm
(2")
SWEAT INLETS
w/STOPS
(R120SS)
103mm
(4-1/16")
149mm
(5-7/8")
32mm(1-1/4")
DIA HOLE
130mm
(5-1/8")
REF.
1/2" COPPER
GENERAL DESCRIPTION:
Complete commercial shower system includes: an R120SS
pressure balance valve and trim, a wall supply with 1/2"
NPT female inlet and 1/2" NPSM male outlet, a 59"
(1500mm) metal shower hose, vacuum breaker, a 3-function
water-saving personal shower with pause feature, slip-on
diverter tub spout and a 36" slide-grab bar.
Valve features a cast brass body, washerless 47mm ceramic
disc valve cartridge with volume and temperature control,
back-to-back capability, integrated check valves and hot limit
safety stop. Pressure balancing cartridge maintains constant
output temperature in response to changes in relative hot
and cold supply pressure. One-half inch direct sweat inlets
and outlets. With screwdriver stops. Rough-in plaster guard
designed for use as thin-wall mounting adapter. Durable
metal handle. 3-function water saving hand shower with
pause feature and 1.5gpm/5.7L/min. flow restrictor.
Slide-Grab Bar features an adjustable shower holder which
can be set at any height or position along the bar and angle
up to 45˚.
PRODUCT FEATURES:
VALVE:
Cast Brass Valve Body: Durable.
Ceramic Disc Valve Cartridge: Assures a lifetime of
drip-free performance. Allows control over water
temperature and volume.
Pressure Balancing Valve Cartridge: Maintains
constant output temperature in response to changes in hot
and cold supply pressure. Diaphragm system with
integrated check valves engineered to eliminate cross flow.
Back-to-Back Capability: Hot and cold can be reversed
quickly and easily.
Adjustable Hot Limit Safety Stop: Limits the amount
of hot water allowed to mix with cold. Reduces the risk of
accidental scalding.
Integral Plaster Guard and Mounting Plate:
Protects valve during installation and serves as a mounting
plate for thin-wall installations.
PERSONAL SHOWER:
Water Saving: Saves 40% in water usage.
ADA-Compliant: Non-positive shut-off button on handle
reduces flow to a trickle.
SLIDE-GRAB BAR:
Stronger Than Standard Slide Bars: 1-1/2" diameter
stainless steel bar meets ANSI standard 250 lb. pull test.
Chrome-plated hand shower holder with ADA compliant
lever handle.
84mm
(3-5/16")
206mm
(8-1/8")
1/2" NPSM
41.5mm
(1-5/8")
914mm
(36")
954mm
(37-1/2")
FINISHED
WALL
79mm
(3-1/8") DIA.
79mm
(3-1/8") DIA.
79mm
(3-1/8") DIA.
OPTIONAL TO FINISHED FLOOR
USUALLY BETWEEN
FINISHED
FLOOR
915mm
(36")
1525mm
(60")
TO
Revised 3/15