Specification Sheet

ManualsBrandsAmerican Standard ManualsShower FaucetsAmerican Standard Tub and Shower Trim Package with Multi Function Hand Shower, Slide Bar, Hose, and Valve Trims - Rough In Included

L473

Revised 3/15

COMMERCIAL SHOWER SYSTEMS

2.5 GPM SHOWER SYSTEM KIT

WITH SLIDE-GRAB BAR, HAND SHOWER & DIVERTER TUB SPOUT

(153mm)

(76mm)

6-3/4"

(171mm)

MODEL NUMBER:

1662SG.225 Commercial Shower System Kit

Includes:

SUGGESTED SPECIFICATION:

Shower system shall feature a wall supply with 1/2" NPT female inlets and 1/2" NPSM male outlet, 59" metal hose, vacuum

breaker, 2.5 gpm/9.5L/min. 3-function hand shower with pause feature, slip-on diverter tub spout and a 36" slide-grab bar.

Pressure Balance valve shall feature a cast brass body. Shall feature ceramic disc valve cartridge which controls water

temperature and volume. Shall also feature hot limit safety stop. Fitting shall be American Standard Model # 1662SG.225.002.

CODES AND STANDARDS

Install as required to comply with local code

requirements.

ASME A112.18.1

ASSE 1016

CSA B 125

ANSI A117.1

1662SG.225

Product

Number

Description

Commercial Shower System Kit. Contains pressure balance valve with volume and temperature control,

trim kit, 3-function hand shower with pause feature, metal hose, vacuum breaker, wall supply,

slip-on diverter tub spout and 36" slide-grab bar. 2.5gpm/9.5L/min.

Finish

Polished

Chrome

002

1/2 NOM.

COPPER

SWEAT ALL

CONNECTIONS

"SEE ILLUSTRATION BELOW"

32mm

(1-1/4")

13mm (1/2")

INLET:

1/2" NPT

1829mm (72")

to 1990mm (78")

(OPTIONAL)

TO FINISHED

FLOOR

RUBBER GASKET

FINISHED WALL

OUTLET:

1/2" NPSM HOSE

CONNECTION

53mm

(2-1/16")

• Shower Valve with SS R120SS

• Colony Soft Valve Only Trim T675.500.002

• 3-F Hand Shower 1660.767.002

with Pause Feature

• In-Line Vacuum Breaker 1660.400.002

• Metal Hose 8888.035.002

• Wall Supply 8888.037.002

• 36" Slide-Grab Bar 1662.236.002

• Slip-On Diverter Tub Spout 8888.026

51mm

(2")

SWEAT INLETS

w/STOPS

(R120SS)

103mm

(4-1/16")

149mm

(5-7/8")

FLOW RATE

GALLONS PER MINUTE

INLET PRESSURE (PSI)

10080604020

32mm(1-1/4")

DIA HOLE

130mm

(5-1/8")

REF.

1/2" COPPER

GENERAL DESCRIPTION:

Complete commercial shower system includes: an

R120SS pressure balance valve and trim, a wall supply

with 1/2" NPT female inlet and 1/2" NPSM male outlet, a

59" (1500mm) metal shower hose, vacuum breaker, a

3-function hand shower with pause feature, slip on

diverter tub spout and a 36" slide-grab bar.

Valve features a cast brass body, washerless 47mm ceramic

disc valve cartridge with volume and temperature control,

back-to-back capability, integrated check valves and hot limit

safety stop. Pressure balancing cartridge maintains constant

output temperature in response to changes in relative hot

and cold supply pressure. One-half inch direct sweat inlets

and outlets. With screwdriver stops. Rough-in plaster guard

designed for use as thin-wall mounting adapter. Durable

metal handle. 3-function hand shower with pause feature

and 2.5gpm/9.5L/min. flow restrictor. Slide-Grab Bar

features an adjustable shower holder which can be set at

any height or position along the bar and angle up to 45˚.

PRODUCT FEATURES:

VALVE:

Cast Brass Valve Body: Durable.

Ceramic Disc Valve Cartridge: Assures a lifetime of

drip-free performance. Allows control over water

temperature and volume.

Pressure Balancing Valve Cartridge: Maintains

constant output temperature in response to changes in hot

and cold supply pressure. Diaphragm system with

integrated check valves engineered to eliminate cross flow.

Back-to-Back Capability:

Hot and cold can be reversed

quickly and easily.

Adjustable Hot Limit Safety Stop: Limits the amount

of hot water allowed to mix with cold. Reduces the risk of

accidental scalding.

Integral Plaster Guard and Mounting Plate:

Protects valve during installation and serves as a mounting

plate for thin-wall installations.

PERSONAL SHOWER:

ADA-Compliant: Non-positive shut-off button on

handle reduces flow to a trickle.

SLIDE-GRAB BAR:

Stronger Than Standard Slide Bars: 1-1/2" diameter

stainless steel bar meets ANSI standard 250 lb. pull test.

Chrome-plated hand shower holder with ADA compliant

lever handle.

84mm

(3-5/16")

206mm

(8-1/8")

1/2" NPSM

41.5mm

(1-5/8")

914mm

(36")

954mm

(37-1/2")

FINISHED

WALL

79mm

(3-1/8") DIA.

79mm

(3-1/8") DIA.

79mm

(3-1/8") DIA.

OPTIONAL TO FINISHED FLOOR

USUALLY BETWEEN

FINISHED

FLOOR

915mm

(36")

1525mm

(60")

Summary of content (2 pages)

PAGE 1
COMMERCIAL SHOWER SYSTEMS 2.5 GPM SHOWER SYSTEM KIT WITH SLIDE-GRAB BAR, HAND SHOWER & DIVERTER TUB SPOUT MODEL NUMBER: 1662SG.225 Commercial Shower System Kit Includes: • Shower Valve with SS • Colony Soft Valve Only Trim • 3-F Hand Shower with Pause Feature • In-Line Vacuum Breaker • Metal Hose • Wall Supply • 36" Slide-Grab Bar • Slip-On Diverter Tub Spout GENERAL DESCRIPTION: VALVE: Cast Brass Valve Body: Durable. Ceramic Disc Valve Cartridge: Assures a lifetime of drip-free performance.
PAGE 2
COMMERCIAL SHOWER SYSTEMS 2.5 GPM SHOWER SYSTEM KIT WITH SLIDE-GRAB BAR, HAND SHOWER & DIVERTER TUB SPOUT CODES AND STANDARDS Install as required to comply with local code requirements. ASME A112.18.1 ASSE 1016 CSA B 125 ANSI A117.1 Finish Product Number Polished Chrome Description 002 Commercial Shower System Kit. Contains pressure balance valve with volume and temperature control, 1662SG.