Installation Instructions

2
755143-100 Rev. A 10/16
In the United States:
American Standard Brands
1 Centennial Ave.
Piscataway, New Jersey 08854
Attention: Director of Customer Care
For residents of the United States, warranty
information may also be obtained by calling
the following toll free number: [phone]
www.americanstandard.com
In Canada:
AS Canada, ULC
5900 Avebury Rd.
Mississauga, Ontario
Canada L5R 3M3
Toll Free: [phone]
www.americanstandard.ca
In Mexico:
American Standard B&K Mexico
S. de R.L. de C.V.
Via Morelos #330
Col. Santa Clara
Ecatepec 55540 Edo. Mexico
Toll Free: 01-800-839-1200
www.americanstandard.com.mx
CHANGE THE DRAIN
Use a pipe wrench and plug wrench to loosen the drain nut
in the bottom of the outside of the tub as shown in Fig. 3.
Remove toe tap drain cover.
Place the tub on it's side. Place the plug wrench inside the
drain from the inside so that the pipe wrench does not turn.
With the plug wrench in place unscrew the drain nut and
remove it by turning the pipe wrench.
From the inside of the tub remove the drain body.
1
Remove the old drain assembly. Separate the
replacement drain body from the drain nut.
2 5
Tighten drain nut using a pipe wrench and plug wrench.
Make sure all of the silicone seals are in the proper location
(as shown in Fig. 4) and there is no water leaking.
4
Install the tub by following the instructions included
with the tub.
Fig. 3
Install the replacement finish drain as shown in Fig. 4.
3
Fig. 4
DRAIN
NUT
SILICONE SEAL
PLUG NUT
SILICONE
SEAL
SILICONE SEAL
* PLUG WRENCH
* PLUG WRENCH not included in kit.
DRAIN COVER
TUB FLOOR
Remove toe tap drain cover.
Place the tub on it's side. Place the plug wrench inside the drain from the inside so that the pipe
wrench doesn't turn. With the plug wrench in place unscrew the drain nut and remove it by
turning the pipe wrench.
From the inside of the tub remove the drain body.