Instructions / Assembly

- 6 -
791679-100 Rev. C 1/18
4B
Installing Countertop - Under Mount Installation
ACTUAL SINK
DIMENSIONS
COUNTERTOP
CUTOUT DIMENSION
COUNTERTOP
CUTOUT
DIMENSION
1" (25mm) 1" (25mm)
CABINET OPENING DIMENSION
1" (25mm)
5A
APPLY SEALANT
Under mount cutout opening is determined by cabinet opening and should be 1" (2.5mm ) smaller than the
cabinet opening on the sides and from back of sink apron. Carefully cut out the countertop opening, opening
must be adequately finished and sealed to prevent damage from water absorption.
Note: Check dimensions on first page as a reference and measure the sink being installed.
For Flush Mount Sinks: Carefully wipe clean
the sink apron and top rim free from all debris.
Ensure that the surface on underside of
countertop and around the countertop cutout
opening is smooth and free of debris. Flush
mount installation requires a generous bead of
sealant around the sink apron where sink and
countertop will meet.
APPLY SEALANT
THREE SIDES
TOP OF CABINET