Operating instructions

12
4.3 Operating Conditions
Use in dry, relatively clean environments at 5
o
C to 50
o
C [40
o
F to 120
o
F] with clean, dry boxes.
Note: Machine should not be washed or subjected to conditions causing moisture condensation
on components.
2011 June
200a-NA
4-SPECIFICATIONS
4.1 Power Requirements
Electrical: 115 Volt, 60Hz, 1.9 A (220 watts)
The machine is equipped with a 2.4m [8 foot] standard neoprene covered power cord and a grounded plug.
Contact your 3M Representative for power requirements not listed above.
4.5 Tape Width
36mm [1 1/2 inch] minimum to 48mm [2 inch] maximum
4.4 Tape
Scotch
®
pressure-sensitive fi lm box sealing tapes.
• To reduce the risk associated with fire
and explosion hazards:
− Do not operate this equipment in poten-
tially fl ammable or explosive environments.
WARNING
4.2 Operating Rate
Box drive belt speed is approximately 0.5 m/s [100 feet per minute].