Installation Sheet

7302406-100
- 3 -
5
7
6
!
WARNING: Overtightening of water supply
line nuts could result in breakage and
potential flooding. If the connection leaks
after hand tightening, replace the supply line.
Do not use any type of sealant on the water
supply connection. Use of plumber’s putty,
pipe dope, or any other type of sealant will
void the warranty.
Connect water
supply line.
(Sold separately)
Hand tighten nut.
A
NOTE: To ease installation,
push down on the top of the
tank while tightening handles.
Tighten handles alternately
until the tank contacts the front
and back of the bowl achieving
china-to-china contact.
B
Turn on water supply.
8
Adjust water level to level
indicated on tank by turning
water level adjustment knob
to move float cup up or down.
WATER LEVEL
ADJUSTMENT KNOB
TRIP LEVER
ROD
FLUSH
VALVE
FLAPPER
WATER SUPPLY LINE
TANK TO BOWL GASKET
APPROXIMATE
WATER LEVEL
FLUSH
VALVE
CHAIN
FILL VALVE
OR WATER
CONTROL
FLOAT CUP
REFILL
TUBE
OVERFLOW
TUBE
FLAPPER
SEAL
!
Tank to Bowl Gasket
Place the tank gasket over
the tank nut ensuring there
are no gaps between the
gasket and the chinaware.
Install tank bolts in
bottom of tank as shown.
SINGLE FLUSH