Specifications

K88
© 2014 AS America Inc.
1/14
CHAMPION
®
PRO
RIGHT HEIGHT
®
ELONGATED TOILET
❑ 211A A.004
• Features Champion® Flushing System
• Vitreous china
• Low consumption (1.6 gpf/6.0 Lpf) toilet
• Trade exclusive tank
• PowerWash
®
rim scrubs bowl with each ush
• Robust metal trip lever & metal shank ll valve
• Includes EZ-Install tools w/color match bowl caps
• EverClean
®
Surface included
• 4" piston-action Accelerator™ ush valve
• Fully-glazed 2-3/8" trapway
• 16-1/2" rim height for accessible applications
• 12" (305mm) rough-in
• Generous 9" x 8" water surface area
• Chrome nish trip lever is supplied
• 1,000g MaP Score** at 1.6gpf
• 10 year warranty
❑ 211A A.005 Same as above except trip lever on
right hand side
❑ 3195A.101 Right Height
®
Elongated Bowl
❑ 4225A.004 Tank
Nominal Dimensions:
768 x 483 x 785mm (30-1/4" x 19" x 30-7/8")
Fixture only, seat and supply sold separately
Alternative Tank Congurations Available:
❑ 4225A.064 Tank complete with tank cover
locking device
❑ 4225A.005 Tank complete with trip lever located
on right side
Compliance Certications -
Meets or Exceeds the Following Specications:
• ASME A112.19.2-2008/CSA B45.1-08 for Vitreous
China Fixtures
CHAMPION
®
PRO
RIGHT HEIGHT
®
ELONGATED TOILET
VITREOUS CHINA
To Be Specied:
❏ Color: ❏ White ❏ Bone ❏ Linen ❏ Black
❏ Seat: #5325.010 Elongated Champion
®
Slow Close
solid plastic seat and cover
❏ Supply with stop:
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND
ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE
BUILDING FACILITIES-CHECK LOCAL CODES.
BARRIER FREE
NOTES:
THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF
305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
*
DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
IMPORTANT: Dimensions of xtures are nominal and may vary within the
range of tolerances established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided pages.
** Maximum Performance (MaP) testing performed by
IAPMO R&T Lab. MaP Report conducted by Veritec
Consulting, Inc. and Koeller and Company.
19"
(483mm)
30-1/4"
(768mm)
9"
(230mm)
1" (26mm)
3-9/16" (90mm)
10-1/2"
(267mm)
30-7/8"
(785mm)
16-1/2"
(419mm)
FINISHED WALL
FINISHED
FLOOR
SUPPLY
AS
REQ'D
14"
(356mm)
C/L OF OUTLET
6"
(152mm)
*10"
(254mm)
470mm
(18-1/2")
C/L OF SEAT POST HOLES
140mm (5-1/2" CENTERS)
12"
(305mm)
13-13/16"
(351mm)
9-3/8"
(238mm)