Installation Guide

3
7302187-100 Rev. A
5
7
6
!
!
WARNING: Overtightening of water supply line
nuts could result in breakage and potential
flooding. If the connection leaks after hand
tightening, replace the supply line. Do not use any
type of sealant on the water supply connection.
Use of plumber’s putty, pipe dope, or any other
type of sealant will void the warranty.
WARNING: Do not use plumber’s putty, pipe dope,
or any other sealant on the water supply connection
to this tank. If the connection leaks after hand
tightening, replace the supply line. If the connection
continues to leak with the new supply line, replace
the fill valve. Warranty is void if any type of sealant
is used on the water supply connection.
Confirm gaskets are fully seated on tank.
NOTES:
a) To ease installation, push
down on the top of the tank
while tightening handles.
b) Tighten all three bolts adequately.
Tighten handles alternately
until the tank contacts the front
and back of the bowl achieving
china-to-china contact.
Turn on
water supply.
A
Connect water
supply line. (Sold
separately) Hand
tighten nut.
B
GASKETS
3 4
Apply weight evenly.
Do not move after
placement. Water
tight seal may break.
Hand tighten
only. Do not
overtighten.
!