Specification Sheet
H133
© 2012 AS America Inc.
To Be Specied:
❏ Color:
❏ Bath Filler: (specify nish)
❏ Bath Drain: (included)
To Be Specied - Optional:
❏ Pressure Test Kit
†
: 791363-0070A for integral
overow models only
PRINCETON
™
RECESS BATH
AMERICAST
®
BRAND ENGINEERED MATERIAL
Revised 8/12
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES
AND ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND
USEABLE BUILDING FACILITIES-CHECK LOCAL CODES.
INSTALL WITH SEAT AT HEAD END.
SEE REVERSE FOR PRODUCT DIMENSIONS
AND SPECIFICATIONS
Americast
®
brand engineered material is a composition of porcelain bonded
to enameling grade metal, bonded to a patented structural composite.
Photograph details integral overow and drain
assembly. Drain assembly included with bath.
With Integral Overow
*See faucet section for additional models available
†
When system pressure test is required, the pressure test kit is
necessary to seal overow and perform test.
PRINCETON™ RECESS BATH
Americast
®
brand engineered material
• Acid resistant porcelain nish
• Recess bath with integral apron and tiling ange
• Integral lumbar support
• Beveled headrest
• Full slip-resistant coverage
• End drain outlet
• Integral base
❏ 2390.202 Left Hand Outlet
❏ 2390.202TC Same as above with Tub Cover
❏ 2391.202 Right Hand Outlet
❏ 2391.202TC Same as above with Tub Cover
With Integral Overow
• Lift and turn drain stopper assembly included
with bath
• Escutcheon included and installed on bath
❏ 2390.202 ICH (Chrome Trim) Left Hand Outlet
❏ 2390.202 ICHTC Same as above with Tub Cover
❏ 2391.202 ICH (Chrome Trim) Right Hand Outlet
❏ 2391.202 ICHTC Same as above with Tub Cover
For Above Floor Rough Installation
❏ 2392.202 Left Hand Outlet for above
oor installation
❏ 2392.202TC Same as above with Tub Cover
❏ 2393.202 Right Hand Outlet for above
oor installation
❏ 2393.202TC Same as above with Tub Cover
Nominal Dimensions:
1524 x 762 x 356mm
(60" x 30" x 14")
Above Floor Rough Dimensions:
1524 x 762 x 445mm
(60" x 30" x 17-1/2")
Bathing Well Dimensions:
1423 x 635 x 337mm
(56" x 25" x 13-1/4")
Compliance Certications -
Meets or Exceeds the Following Specications:
• ASME A112.19.4 for Americast Plumbing Fixtures
• ASTM F-462 for Slip-resistant Bathing Facilities
• ANSI Z124.1 Ignition Test
• ASTM E162 for Flammability
• NFPA 258 for Smoke Density
BARRIER FREE
© 2012 AS America Inc.