Use and Care Guide

PRINCETON™
RECESS BATH
AMERICAST
®
BRAND ENGINEERED MATERIAL
PRINCETON RECESS BATH
Americast
®
brand engineered material
❏ 2391.202 Right Hand Outlet
❏ 2391.202TC Same as above w/tub cover
❏ 2390.202 Left Hand Outlet
❏ 2390.202TC Same as above w/tub cover
• Acid resistant porcelain finish
• Recess bath with integral apron and tiling
flange
• Integral lumbar support
• Beveled headrest
• Full slip-resistant coverage
• End drain outlet
PRINCETON RECESS BATH for Above Floor
Rough Installation
❏ 2392.202 Left Hand Outlet for above floor
installation
❏ 2392.202TC Same as above w/tub cover
❏ 2393.202 Right Hand Outlet for above floor
installation
❏ 2393.202TC Same as above w/tub cover
Nominal Dimensions: 1524 x 762 x 356mm
(445mm for above floor installation)
60" x 30" x 14" (17-1/2” for above floor instal-
lation)
Bathing Well Dimensions: 1423 x 635 x 337mm
(56" x 25" x 13-1/4")
Americast
®
brand engineered material is a
composition of porcelain bonded to enameling
grade metal, bonded to a patented structural
composite.
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• ASME A112.19.4 for Americast Plumbing Fixtures
• ASTM F-462 for Slip-resistant Bathing Facilities
• ANSI Z124.1 Ignition Test
• ASTM E162 for Flammability
• NFPA 258 for Smoke Density
To Be Specified
❏ Color:
❏ Bath Faucet*:
❏ Faucet Finish:
❏ Drain:
❏ Drain Finish:
© 1998 American Standard Inc.
SPS 2391/2390/2392/2393
* See faucet section for additional models available
NOTE: Roughing-in dimensions shown on reverse side of
page.
BV-027
Revised 5/98