Use and Care Guide

H137
© 2009 AS America Inc.
PRINCETON
™
RECESS BATH W/ LUXURY
LEDGE AND INTEGRAL OVERFLOW
AMERICAST
®
BRAND ENGINEERED MATERIAL
PRINCETON™ RECESS BATH W/ LUXURY
LEDGE AND INTEGRAL OVERFLOW
for Above Floor Rough Installation
Americast
®
brand engineered material
❏ 2396.202 ICH (Chrome Trim)
Left Hand Outlet for above oor installation
❏ 2396.202 ICHTC Same as above with Tub Cover
❏ 2397.202 ICH (Chrome Trim)
Right Hand Outlet for above oor installation
❏ 2397.202 ICHTC Same as above with Tub Cover
❏ 2396.202 IPB (Polished Brass Trim)
Left Hand Outlet
❏ 2396.202 IPBTC Same as above with Tub Cover
❏ 2397.202 IPB (Polished Brass Trim)
Right Hand Outlet
❏ 2397.202 IPBTC Same as above with Tub Cover
❏ 2396.202 IBS (Brushed Satin Trim)
Left Hand Outlet
❏ 2396.202 IBSTC Same as above with Tub Cover
❏ 2397.202 IBS (Brushed Satin Trim)
Right Hand Outlet
❏ 2397.202 IBSTC Same as above with Tub Cover
• Lift and turn drain stopper assembly included
with bath
• Escutcheon included and installed on bath
• Acid resistant porcelain nish
• Recess bath with integral apron and
tiling ange
• Integral lumbar support
• Beveled headrest
• Extra wide ledge for placement of toiletries
• Full slip-resistant coverage
• End drain outlet
• Integral base
Nominal Dimensions:
1524 x 864 x 445mm
(60" x 34" x 17-1/2")
Bathing Well Dimensions:
1423 x 635 x 337mm
(56" x 25" x 13-1/4")
Compliance Certications -
Meets or Exceeds the Following Specications:
• ASME A112.19.4 for Americast Plumbing Fixtures
• ASTM F-462 for Slip-resistant Bathing Facilities
• ANSI Z124.1 Ignition Test
• ASTM E162 for Flammability
• NFPA 258 for Smoke Density
Revised 10/09
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES
AND ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND
USEABLE BUILDING FACILITIES-CHECK LOCAL CODES.
INSTALL WITH SEAT AT HEAD END.
SEE REVERSE FOR PRODUCT DIMENSIONS
AND SPECIFICATIONS
Photograph details integral overow and drain
assembly. Drain assembly included with bath.
BARRIER FREE
Americast
®
brand engineered material is a composition of porcelain bonded
to enameling grade metal, bonded to a patented structural composite.
To Be Specied:
❏ Color:
❏ Bath Filler: (specify nish)
❏ Bath Drain: (included)
To Be Specied - Optional:
❏ Pressure Test Kit
†
: 791363-0070A
*See faucet section for additional models available
†
When system pressure test is required, the pressure test kit is
necessary to seal overow and perform test.
© 2009 AS America Inc.