Installation Guide

K25
© 2010 AS America Inc.
To Be Specied:
❑Color:
❏White❏Bone❏Linen❏Black
❑ SupplywithStop:
COMPACT CADET
®
3 FloWise
®
RIGHT HEIGHT
™
ELONGATED ONE-PIECE TOILET
VITREOUS CHINA
COMPACT CADET
®
3 FloWise
®
RIGHT HEIGHT™
ELONGATED ONE-PIECE TOILET WITH SEAT
❑ 2403.128
•Vitreouschina
•MeetsdenitionforHET(HighEfficiencyToilet)
•HighEfficiency(4.8Lpf/1.28gpf)
•MeetsEPAWaterSense
®
criteria
•Spacesavingcompactdesign-Elongated 
 RightHeightbowltsinthesamespaceas
 aroundfronttoilet
•EverClean
®
surfaceinhibitsthegrowthof
stain-andodor-causingbacteria,mold,
andmildewonthesurface
•FeaturingtheCadet
®
3 Flushing System
•One-piecedesign
•Elongatedsiphonactionjettedbowlwith
 2-1/8"trapway
•Internaltrapwayareafullyglazed
•Rimheightat419mm(16-1/2")foraccessible
 application
•Includescolor-matchedanddesign-matched
solidplastictoiletseatandcoverwithslow-
closehingesandEverClean
®
surface.
Seatfeaturesuniquesanitaryseatlifttab
•Oversized3"FlushValvewithChemical
 ResistantFlapper
•10"x8"watersurfacearea
•2boltcaps
•ChromeTripLever
•100%factoryushtested
• 5yearwarranty
❑ 2403.513Sameasabove,exceptwith
Aquaguradlinerintank
❑ 2403.813Sameasabove,exceptwith
tripleveronrightside
❑ 2403.328Sameasabove,lessseat
Nominal Dimensions:
724x394x724mm(28-1/2"x15-1/2"x28-1/2")
Fixtureonly,supplybyothers
Compliance Certications -
Meets or Exceeds the Following Specications:
•ASMEA112.19.2-2008/CSAB45.1-08forVitreous
ChinaFixtures
•USEPAWaterSense
®
SpecicationforHET's
NOTES:
THISTOILETISDESIGNEDTOROUGH-INATAMINIMUMDIMENSIONOF
305MM(12")FROMFINISHEDWALLTOC/LOFOUTLET.
SUPPLYNOTINCLUDEDWITHFIXTUREANDMUSTBEORDERED
SEPARATELY.
*
DIMENSIONSHOWNFORLOCATIONOFSUPPLYISSUGGESTED.
IMPORTANT:Dimensionsofxturesarenominalandmayvarywithinthe
rangeoftoleranceestablishedbyANSIStandardA112.19.2
Thesemeasurementsaresubjecttochangeorcancellation.Noresponsibility
isassumedforuseofsupersededorvoidedpages.
724mm
(28-1/2")
159mm
(6-1/4")
16 ± 6mm
(5/8" ± 1/4")
419mm
(16-1/2")
292mm
(11-1/2")
267mm
(10-1/2")
724mm
(28-1/2")
381mm
(15")
394mm
(15-1/2")
79mm
(3-1/8")
FINISHED WALL
422mm
(16-5/8")
305mm
(12")
C/L OF OUTLET
241mm
(9-1/2")
140mm
(5-1/2")
SUPPLY
AS
REQ'D
*
FINISHED
FLOOR
C/L OF SEAT POST
HOLES 140mm
(5-1/2") CENTERS
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND
ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE
BUILDING FACILITIES-CHECK LOCAL CODES.
Revised10/10
Certified by
IAPMO R&T