Specification Sheet

H112
© 2013 AS America Inc.
EVOLUTION
®
5' x 32"
WHIRLPOOL AND BATHING POOL
HIGH GLOSS
Revised4/13
NOTES:
BATHCANBEINSTALLEDEITHERABOVEORBELOWFLOORLINEASPIER,ISLAND,ORPENINSULATYPEINSTALLATION.SUPPORTOF
BATHBYSUMPBEDDING.SUPPORTANDENCLOSINGMATERIALBYOTHERS.
■ REFERTOINSTALLATIONINSTRUCTIONSSUPPLIEDWITHWHIRLPOOLFORADDITIONALINFORMATION.
FITTINGSNOTINCLUDEDANDMUSTBEORDEREDSEPARATELY.
PROVIDESUITABLEREINFORCEMENTFORALLSUPPORTS.
IMPORTANT:DimensionsofxturesarenominalandmayvarywithintherangeoftolerancesestablishedbyANSIStandardZ124.1andA112.19.7.
Thesemeasurementsaresubjecttochangeorcancellation.Noresponsibilityisassumedforuseofsupersededorvoidedleaet.
Model 2422VA
shown
60 x 32 x 21-1/2 In.
(1524 x 813 x 546mm)
74 Lbs. (34 Kg.)
690 Lbs. (313 Kg.)
74 Gal. (280 L)
33 Gal. (125 L)
41-1/4 x 22-1/4 In. (1048 x 565mm)
52-1/4 X 26 In. (1327 x 660mm)
18-1/2 In. (470mm)
52 Lbs./Sq.Ft. (253 Kgs./Sq.m)
GENERAL SPECIFICATIONS FOR 2422V WHIRLPOOL
INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
WHIRLPOOL MIN. OPERATING VOL.
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
WHIRLPOOL ELECTRICAL SPECIFICATIONS
1.4 HP, 9.7 AMPS, 120V.PUMP
1.0 HP, 10 AMPS, 120V.BLOWER
AIR BATH ELECTRICAL SPECIFICATIONS
60"
(1524mm)
32"
(813mm)
11"
(279mm)
7-3/4"
(197mm)
13-3/4"
(349mm)
6"
(152mm)
3"
(76mm)
3-1/4"
(83mm)
32"
(813mm)
20"(C)
(502mm)
21-1/2"(H)
(546mm)
C/L OF
OVERFLOW
20-1/8"(A)
(511mm)
CUT OUT IN FLOOR
FOR DRAIN
GENERAL SPECIFICATIONS FOR 2422V BATHING POOL
60 x 32 x 20-1/2 (1524 x 813 x 546mm)
54 Lbs. (27 Kg.)
675 Lbs. (306 Kg.)
74 Gal. (280 L.)
41-1/4 x 22-1/4 In. (1048 x 565mm)
52-1/4 x 26 In. (1327 x 660mm)
18-1/2 (470mm)
57 Lbs./Sq.Ft. (247 Kgs./Sq.m)
INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)