Dimensions Guide

H81
© 2006 American Standard Inc.
Revised 5/06
SEE REVERSE FOR ROUGHING-IN DIMENSIONS
AND PRODUCT SPECIFICATIONS
To Be Speci ed - Required:
❏ Color:
❏ Bath Filler: (specify  nish)
❏ Bath Drain: 1583.470 (specify  nish)
To Be Speci ed - Optional:
❏ Safe-T-Heater*: 9075.120
❏ Jet Trim Ring Kit: 9860.200-one per kit (specify color)
for Body Massage Jets only
❏ Universal Tile Bead Kit: 751755-100
For color/ nish availability and other faucet choices, please
see the Product Selector and Pricing Guide.
* NOTE: the Safe-T-Heater is designed to maintain water
temperature during operation. It will not heat cold water to
desired bathing temperature.
Americast
®
brand engineered material is a composition of porcelain bonded
to enameling grade metal, bonded to a patented structural composite.
STRATFORD™ 5-1/2'
WHIRLPOOL AND BATHING POOL
AMERICAST
®
BRAND ENGINEERED MATERIAL
STRATFORD™ 5-1/2' WHIRLPOOL &
BATHING POOL
❏ 2470.028W Whirlpool Featuring System I:
• Americast
®
brand engineered material
• Acid-resistant porcelain  nish
• Integral lumbar support with beveled headrest
• Full slip-resistant coverage
• End drain outlet
• 1.5 HP single speed, self-draining pump/motor
• Factory installed power cord and plug
• Six multi-directional and  ow-adjustable jets
• Deck-mounted air switch On/Off
• Two silent air volume controls
• Quick Connect Safe-T-Heater
connection system
• Factory installed and tested whirlpool system
❏ 2470.128W Whirlpool Massage featuring
System I with Grab Bar Drilling
• Same as 2470.028W except with grab bar
drilling (grab bar must be ordered separately)
❏ 2470.028WC EverClean™ Whirlpool Massage
featuring System I
• Same as 2470.018W except with the
EverClean™ whirlpool system featuring
Antimicrobial AlphaSan
®
❏ 2470.128WC EverClean™ Whirlpool Massage
featuring System I
• Same as 2470.128W except with the
EverClean™ whirlpool system featuring
Antimicrobial AlphaSan
®
and grab bar drilling
(grab bar must be ordered separately)
❏ 2470.002 Bathing Pool
❏ 2470.102 Bathing Pool with Grab Bar Drilling
• Same as 2470.002 except with grab bar drilling
(grab bar must be ordered separately)
Nominal Dimensions:
66" x 32" x 20" (1676 x 813 x 508mm)
Bathing Well Dimensions:
60" x 27" x 18" (1524 x 686 x 457mm)
Compliance Certi cations -
Meets or Exceeds the Following Speci cations:
• Underwriters Laboratories - Hydromassage
Bathtubs UL 1795
• ASME A112.19.7M for Whirlpool Appliances
• ASME A112.19.4M for Americast Fixtures
• ASTM F-462 for Slip-resistant Bathing Facilities
• ASTM E162 for Flammability
• NFPA 258 for Smoke Density