Instructions / Assembly

SAVE FOR FUTURE USE
1
7301916-100 Rev. A
Product names listed herein are trademarks of AS Americas Inc.
© AS Americas Inc. 2017
2
3
Putty Knife Sealant
Tape Measure
Regular Screwdriver
Adjustable Wrench
Carpenters Level
Flush Valve
RECOMMENDED TOOLS AND MATERIALS
Pictures may not exactly define contour of china.
Model 2599.001
MADERA YOUTH
™
FloWise
®
14" HEIGHT
ELONGATED FLUSHOMETER TOILET
CAUTION: PRODUCT IS FRAGILE. TWO PEOPLE ARE RECOMMENDED FOR HANDLING TO AVOID
BREAKAGE AND POSSIBLE INJURY!
NOTE: For proper operation product requires a minimum of 30 psi working line pressure
Thank you for selecting American Standard – the benchmark of fine quality for over 100 years. To ensure this product is installed
properly, please read these instructions carefully before you begin. (Certain installations may require professional help.) Also be
sure your installation conforms to local codes.
!
CLOSET
FLANGE
CLOSET
BOLTS
10"
254mm
WAX RING
SEALANT
INSTALL WAX SEAL
Invert toilet on floor (cushion to prevent damage),
and install wax ring evenly around waste flange
(horn), with tapered end of ring facing toilet. Apply
a thin bead of sealant around toilet base.
INSTALLATION
INSTRUCTIONS
648mm
(25-1/2")
1-1/2"
SPUD
121mm
(4-3/4")
238mm
(9-3/8")
356mm
(14")
470mm
(18-1/2")
356mm
(14")
338mm
(13-5/16")
150mm
(5-7/8")
254mm
(10")
13mm
(1/2")
25mm
(1")
102mm
(4")
718mm
(28-1/4")
C/L OF SEAT POST HOLES
140mm (5-1/2") CENTERS
FINISHED WALL
FINISHED
FLOOR
C/L OF OUTLET
1" N.P. T. OR 1" C.W.T. SUPPLY
TO FLUSH VALV E
INSTALL CLOSET BOLTS
Install closet bolts in flange channel, turn 90°,
and slide into place 6" (152 mm) apart and
parallel to wall.