Specifications

754072-100 Rev. A

All wiring must be performed by a licensed electrician in accordance with the national electrical code and all other applicable codes.

WARNING: When using electrical products, basic precautions should always be observed, including the following:

1. DANGER: RISK OF ELECTRIC SHOCK! Connect only to a circuit protected by a ground-fault circuit interrupter.

2. Permit access for servicing blower as noted.

3. All building materials and wiring should be routed away from the air blower.

AIR BATH ELECTRICAL INSTALLATION INSTRUCTIONS

The air bath should be installed on a 120 vac,

15 or 20 amp

dedicated GFCI circuit.

The circuit should be hard-wired from the electrical power supply panel. The

circuit must be a three (3) wire circuit from the electrical supply panel. A

grounded neutral wire and a third wire, earth ground, are essential.

GFCI CIRCUIT REQUIREMENTS: FOR MODEL NUMBERS:

2425L / V.168C-RHO 2422L / V.068C

2425L / V.268C-LHO 2645L / V.068C

2771L / V.068C 7236L / V.068C

PLEASE SEE THE FOLLOWING TABLE FOR GFCI CIRCUIT REQUIREMENTS:

ELECTRONIC ACTIVATED AIR BATH (4 BUTTON PANEL)

120V, 60HZ

15A GFCI

ELECTRICAL

FEED

GFCI