Specification

H42
© 2010 AS America Inc.
TOWN SQUARE
®
6' x 42"
EVERCLEAN
®
AIR BATH
HIGH GLOSS
NOTES:
BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISLAND OR PENINSULA TYPE INSTALLATION. SUMP OF BATH
IS SUPPORTED BY INTEGRAL FEET. NO ADDITIONAL SUPPORT REQUIRED. ENCLOSING MATERIALS BY OTHERS.
● IF INSTALLING A DECK-MOUNTED FITTING, BEFORE DRILLING ANY HOLES: CHECK FOR INTERFERENCE WITH CIRCULATING SYSTEM
PIPING AND DRAIN OVERFLOW. MOUNTING HOLES DRILLED BY INSTALLER.
■ REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH BATH FOR ADDITIONAL INFORMATION.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.
IMPORTANT: Dimensions of xtures are nominal and may vary within the range of tolerances established by ANSI Standard Z124.1 / CSA Certied.
These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided leaet.
Revised 6/10
CONTROL
PANEL
41-3/4"
(1060mm)
26-3/4
(679mm)
7-3/4” TYPICAL
(197mm)
35-3/4"
(908mm)
13-1/4"
(337mm)
4"
(102mm)
71-1/2"
(1816mm)
3"
(76mm)
FLOOR CUTOUT
9" X 19"
(229 X 459mm)
OUTLINE OF CUTOUT
70" X 40-1/4" (1778 X 1022mm)
PROVIDE ACCESS
TO BLOWER FOR
SERVICE ON ALL
INSTALLATIONS
INTEGRAL
FITTING DECK
3" X 14"
(76 X 356mm)
3/4"
(19mm)
EDGE OF
FLOOR
CUTOUT
AIR BLOWER
C/L OF
DRAIN
OUTLET
LEVELING STRINGER
(NOT FOR SUPPORT)
1-1/2" N.P.T. THREADS
2"
(51mm)
3-1/4"
(83mm)
C/L OF
OVERFLOW
20"
(508mm)
22"
(559mm)
ROUGH
FLOOR
1-1/2" O.D.TAILPIECE
5/8"
(16mm)
3"
(76mm)
AIR BLOWER
10-1/4”
(260mm)
INTEGRAL FEET WITH
ATTACHED BASEBOARD
GENERAL SPECIFICATIONS FOR 2742
AIR MASSAGE SYSTEM
71-1/2 x 41-3/4 x 22 In. (1816 x 1060 x 559mm)
115 Lbs. (52 Kg.)
690 Lbs. (313 Kg.)
69 Gal. (261 L)
41 x 21-1/2 In. (1041 x 546mm)
62 x 31-1/2 In. (1574 x 800mm)
14-1/4 In. (362mm)
33 Lbs./Sq.Ft. (163 Kgs./Sq.m)
27.8
55.7
1.0 HP, 10 AMPS ,120V.BLOWER
ELECTRICAL SPECIFICATIONS
INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
PTS.
CUBE (FT
3
)