Installation Instructions

In the United States:
American Standard Brands
P.O. Box 6820
Piscataway, New Jersey 08855
Attention: Director of Customer Care
For residents of the United States, warranty
information may also be obtained by calling
the following toll free number: [phone]
www.americanstandard.com
In Canada:
AS Canada, ULC
5900 Avebury Rd.
Mississauga, Ontario
Canada L5R 3M3
Toll Free: [phone]
www.americanstandard.ca
In Mexico:
American Standard B&K Mexico
S. de R.L. de C.V.
Via Morelos #330
Col. Santa Clara
Ecatepec 55540 Edo. Mexico
Toll Free: 01-800-839-1200
www.americanstandard.com.mx
5
754782-100 Rev. F 11/14
POST INSTALLATION CLEAN-UP
Remove all construction debris from bath. Do not use wire brushes or any other metal implement on bath surface.
Post installation clean-up generally can be completed using warm water and liquid dishwashing detergent. Stubborn dirt or stains may be removed using
granular Spic and Span
®
mixed with water.
Painter's naphtha can be used to remove excess adhesives and/or wet oil-base paint.
FEATURES of YOUR NEW AMERICAN STANDARD BATHTUB
Your new bathtub has been molded in the newest plumbing fixture material available today. The unit has a tough durable finishes that is simple and easy
to care for. The colors have been formulated to match other American-Standard fixtures and enhance your choice of bathroom decorations. The high
gloss surface is resistant to impact and chemicals and will retain its lasting luster with proper care and maintenance.
AFTERCARE and CLEANING
• Always fill the tub with temperate water. Excessively hot water may cause surface damage.
• Remove bath mat after use and hang to dry. Allowing bath mat to dry in the tub may cause surface damage.
• Clean after use with a mild liquid household detergent cleaner. Abrasive cleaners such as Lestoil
®
, Lysol
®
Disinfectant (spray or concentrate), or Lysol
®
Basin, Tub and Tile Cleaner, Windex
®
, Mr. Clean
®
, Dow
®
Disinfectant Bathroom Cleaner, or cleaning products in aerosol cans should not be used.
HARSH CHEMICALS SHOULD NEVER BE USED ON ACRYLIC SURFACES.
• Do not use wire brushes, knives or sharp objects to remove stains, cigarette tar deposits, or other surface blemishes.
• Abrasive cleaners or powders must not be used, since they will dull the surface. If the glossy surface looses its sheen, dulled areas can be restored
by rubbing with a white polishing compound and waxing with a "liquid wax."
• Do not wax areas where you walk or stand.
• Do not allow nail polish remover, acetone, dry cleaning fluid, paint remover or other solvents to come into contact with the surface.
• Clean the surrounding surface immediately after using caustic drain cleaners.
• Burning cigarettes will damage the surface.
• Should damage to the fixture occur, repairs can be made. Your distributor or builder can provide details.
AS AMERICA, INC. LIMITED WARRANTY FOR MASTER SERIES TUBS, ACRYLIC BASES, Acrylux
®
PRODUCT
AS America, Inc. (“American Standard
®
”) warrants to the original consumer purchaser that it will, at its option, repair or replace any of its
plumbing products found by it to be defective under normal use and maintenance within the following periods from date of purchase:
Electronic Components – two (2) years; Pump Motors – three (3) years; Fittings and Plumbing – two (2) years; Shell – ten (10) years
residential; three (3) years commercial. In the event of a limited warranty claim proof of purchase will be required — save sales receipt.
This limited warranty DOES NOT COVER the following:
1. Defects or damage arising from shipping, installation, alterations, accidents, abuse, misuse, lack of proper maintenance and use
of other than genuine American Standard replacement parts, in all cases whether caused by a plumbing contractor, service
company, the owner or any other person.
2. Deterioration through normal wear and tear.
3. Expense of normal maintenance – periodic replacement of washers, seals, etc. is a normal maintenance requirement.
4. IN NO EVENT WILL American Standard BE LIABLE FOR THE COST OF REPAIR OR REPLACEMENT OF ANY
INSTALLATION MATERIALS, INCLUDING BUT NOT LIMITED TO, TILES, MARBLE ETC.
5. Postage or shipping costs for returning products for repairs or replacement under this limited warranty and labor or other costs
incurred in connection with product removal or installation under this limited warranty.
6. ANY LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, ALL OF WHICH ARE HEREBY EXPRESSLY
DISCLAIMED, OR THE EXTENSION BEYOND THE DURATION OF THIS LIMITED WARRANTY OF ANY IMPLIED LIMITED
WARRANTIES, INCLUDING THOSE OF MERCHANTABILITY OR FITNESS FOR AN INTENDED PURPOSE. (Some
jurisdictions do not allow limitations on how long an implied limited warranty lasts, or the exclusion or limitation of incidental or
consequential damages, so these limitations and exclusions may not apply to you.)
7. Responsibility for compliance with local code requirement. (Since code requirements vary greatly, distributors, dealers,
installation contractor and users of plumbing products should determine whether there are any code restrictions on the
installation or use of a specific product.)
8. If a whirlpool unit is purchased by a dealer and used as a demonstration unit the limited warranty takes effect as soon as the
dealer uses the product as a demo. If this demonstration unit is subsequently sold to a customer, the dealer may transfer the
remaining period of the limited warranty to the buyer only with American Standard® written approval.
This limited warranty gives you specic legal rights. You may have other statutory rights that vary from state to state or province to province,
in which case this limited warranty does not affect such statutory rights.
SPIC AND SPAN
®
is a registered trademark of The Spic And Span Company
LESTOIL
®
is a registered trademark of the Clorox Company
LYSOL
®
is a registered trademark of Reckitt Benckiser
WINDEX
®
is a registered trademark of S.C. Johnson & Son, Inc
MR. CLEAN
®
is a registered trademark of Agile Pursuits Franchising, Inc.
DOW
®
is a registered trademark of Dow Chemical Company