Dimensions Guide

H53
© 2007 American Standard Inc.
CADET™ CORNER
WHIRLPOOL & BATHING POOL
HIGH GLOSS
CADET™ CORNER WHIRLPOOL &
BATHING POOL
❏ 2775.018W Whirlpool featuring System I
• Acrylic with  berglass reinforcement
• Pre-leveled tub bottom
• Dual, backrest positions
• Molded-in arm rests
• 2.0 HP single speed, self-draining pump/motor
• Factory installed power cord with plug
• Eight multi-directional and  ow-adjustable
jets including:
- Two Ideal- ow jets
- Two body massage jets
- Four recessed back-rest jets
(two in each backrest)
• Deck-mounted air switch On/Off
• Two silent air volume controls
• Quick Connect Safe-T-Heater
connection system
• Factory installed and tested whirlpool system
❏ 2775.018WC EverClean™ Whirlpool Massage
Featuring System I:
• Same as 2775.018W except with the
EverClean™ whirlpool system featuring
Antimicrobial AlphaSan
®
❏ 2775.002 Bathing Pool only
Nominal Dimensions:
2159 x 1524 x 502mm
(85" x 60" x 19-3/4")
Compliance Certi cations -
Meets or Exceeds the Following Speci cations:
• Underwriters Laboratories - Hydromassage
Bathtubs UL 1795
• ASME A112.19.7M for Whirlpool Appliances
• ANSI Z124.1 for Plastic Bathtubs
• ASTM E162 for Flammability
• NFPA 258 for Smoke Density
SEE REVERSE FOR ROUGHING-IN DIMENSIONS
AND PRODUCT SPECIFICATIONS
Revised 10/07
To Be Speci ed - Required:
❏ Color:
❏ Bath Filler: (specify  nish)
❏ Bath Drain: 1583.470 (specify  nish)
To Be Speci ed - Optional:
❏ Safe-T-Heater*: 9075.120
❏ Jet Trim Ring Kit: 9860.200-two per kit (Specify  nish)
for Body Massage Jet only
❏ Universal Tile Bead Kit: 751755-100
❏ Grab Bar Kit: 9822.200-two per kit (specify  nish)
For color/ nish availability and other faucet choices, please
see the Product Selector and Pricing Guide.
* NOTE: the Safe-T-Heater is designed to maintain water
temperature during operation. It will not heat cold water to
desired bathing temperature.