Specification Sheet

K15
© 2012 AS America Inc.
TROPIC
®
FloWise
®
RIGHT HEIGHT
®
ELONGATED ONE-PIECE TOILET
VITREOUS CHINA
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND
ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE
BUILDING FACILITIES-CHECK LOCAL CODES.
TROPIC
®
FloWise
®
RIGHT HEIGHT
®
ELONGATED ONE-PIECE TOILET
❑ 2786.128
•Vitreouschina
•LXP (Luxury Performance) Toilet
•MeetsdenitionforHET(HighEfficiencyToilet)
 1.28gpf/4.8Lpf
•MeetsEPAWaterSense
®
criteria
•QualiesinLEEDSProgram
•Elongatedsiphonactionbowlwith
 smooth-sided,concealedtrapway
•PowerWash
®
rimscrubsbowlwitheachush
•16-1/2"rimheightforaccessibleapplications
•Fullyglazed2"trapway
•EverClean
®
Surfaceinhibitsthegrowthof
 stainandodorcausingbacteria,mold,and
 mildewonthesurface
•Oversized3"ushvalvewithchemically
 resistantapper
•Chrometriplever
•2color-matchedboltholecovers
•Includescolor-matchedDuroplastSlow
 CloseToiletSeatandcoverwitheasylift-off
 featureforsimpleremovalandreattachment
 forcleaning
•100%factoryushtested
•Transitional design coordinates with Tropic
lavatories and faucets
•10yearwarrantyonentiretoilet
Nominal Dimensions:
756x424x778mm
(29-3/4"x16-3/4"x30-1/2")
Fixtureonly,supplybyothers
Compliance Certications -
Meets or Exceeds the Following Specications:
•ASMEA112.19.2-2008/CSAB45.1-08
•USEPAWaterSense
®
SpecicationforHET's
C/L OF SEAT POST
HOLES 5-1/2"
(140mm) CENTERS
29-3/4"
(758 mm)
8-1/8"
(206 mm)
3/4"
(19 mm)
18-1/2"
(470 mm)
3-1/2"
(88 mm)
8-1/2"
(217 mm)
13-1/2"
(345 mm)
14"
(354 mm)
16-3/4"
(424 mm)
30-1/2"
(778 mm)
16-1/2"
(419 mm)
12"
(305 mm)
C/L OF OUTLET AND
TOILET MTG BOLTS
FINISHED WALL
IMPORTANT: Water supply on the wall is required at 3-3/4" or 9" from centerline of the toilet (see rough-in).
First suggested position is hidden behind the toilet. The geometry of the toilet gives space for this installation.
The second suggested position is next to the toilet. Between these two positions, the space for the supply
between wall and toilet is limited to 3-1/4". In this case, check your supply and hose dimensions.
FINISHED
FLOOR
2-7/8" (74mm)
5-1/2"
(140mm)
SUPPLY AS
REQUIRED
(position 2)
SUPPLY AS
REQUIRED
(position 1)
6"
(152mm)
3-3/4"
(95mm)
9"
(229mm)
14"
(355 mm)
OR
NOTES:
THISTOILETISDESIGNEDTOROUGH-INATAMINIMUMDIMENSIONOF
305MM(12")FROMFINISHEDWALLTOC/LOFOUTLET.
SUPPLYNOTINCLUDEDWITHFIXTUREANDMUSTBE
ORDEREDSEPARATELY.
*
DIMENSIONSHOWNFORLOCATIONOFSUPPLYISSUGGESTED.
IMPORTANT:Dimensionsofxturesarenominalandmayvarywithinthe
rangeoftoleranceestablishedbyANSIStandardA112.19.2
Thesemeasurementsaresubjecttochangeorcancellation.Noresponsibility
isassumedforuseofsupersededorvoidedpages.
To Be Specied:
❑ Color:
❏White ❏Linen
❑ SupplywithStop:
Revised1/12