Specification

H35
© 2007 American Standard Inc.
HERITAGE 6'™
WHIRLPOOL
HIGH GLOSS
Revised 6/07
HERITAGE 6'™ WHIRLPOOL
❏ 2806.018WC Whirlpool Featuring System I:
• Acrylic with  berglass reinforcement
• EverClean™ whirlpool system featuring
Antimicrobial AlphaSan
®
• Pre-leveled tub bottom
• Dual, molded-in arm rests
• Integral faucet deck area
• 2.0 HP, two speed, self-draining pump/motor
• Factory installed power cord and plug
• Eight multi-directional and  ow-adjustable
jets including:
- Two Ideal- ow jets
- Four body massage jets
- Two recessed back-rest jets
• Deck-mounted air switch On/Off
• Two silent air volume controls
• Quick Connect Safe-T-Heater
connection system
• Factory installed and tested whirlpool system
❏ 2806.028WC Whirlpool Massage Featuring
System II
Same as 2806.018WC except:
• 2.0 HP, two speed self-draining pump/motor
with dry run seal and Pulse feature
• Deck-mounted electronic On/Off with 20 minute
built-in timed safety shut off and chrome bezel
Nominal Dimensions:
1829 x 908 x 546mm
(72" x 35-3/4" x 21-1/2")
Compliance Certi cations -
Meets or Exceeds the Following Speci cations:
• Underwriters Laboratories - Hydromassage
Bathtubs UL 1795
• ASME A112.19.7M for Whirlpool Appliances
• ANSI Z124.1 for Plastic Bathtubs
• ASTM E162 for Flammability
• NFPA 258 for Smoke Density
SEE REVERSE FOR ROUGHING-IN DIMENSIONS
AND PRODUCT SPECIFICATIONS
To Be Speci ed - Required:
❏ Color:
❏ Bath Filler: (specify  nish)
❏ Bath Drain: 1583.470 (specify  nish)
To Be Speci ed - Optional:
❏ Safe-T-Heater*: 9075.120
❏ Grab Bar Kit: 9822-200-two per kit (specify color)
❏ System II Control Bezel: 9861.100 (specify  nish
For color/ nish availability and other faucet choices, please
see the Product Selector and Pricing Guide.
* NOTE: the Safe-T-Heater is designed to maintain water
temperature during operation. It will not heat cold water to
desired bathing temperature.