Installation Guide

754818-100 Rev. A

OWNER’S MANUAL

1. FIRST, inspect the carton for damage: CAREFULLY DOCUMENT AND PHOTOGRAGH ALL PERCEIVED

DAMAGE. Report all damage claims to customer service at 1-866-423-0800.

2. DO NOT LIFT THE TUB BY THE PLUMBING. Doing so can result in leaks, for which the installer is

responsible. All Walk-In Tubs are water tested before they leave our factory and the bathtub you have

purchased has passed inspection.

3. Immediately inspect the unit for damage even if there is no carton damage. All product damage must be

reported within 72 hours of receipt from American Standard

. Once the unit is installed, surface damages will

be assumed to be installation-related if not reported prior to installation. Installers are also responsible

for damage that occurs once the unit is placed in its niche.

NOTE: Remove all packaging material except for the protective plastic. This has been placed on the tub at

the factory to eliminate abrasions from handling. Thisshould only be removed at final clean up.

4. Inspect the plumbing for any fittings that may have loosened in transit.

5. Read the following instructions completely before installing this product. If the home-owner or installer has any

questions, please call us at 1-866-423-0800.

6. You must follow all the instructions in this manual.

FAILURE TO READ AND COMPLY WITH ALL INSTRUCTIONS CAN RESULT IN PRODUCT DAMAGE

OR INJURY TO BOTH INSTALLER AND HOMEOWNER. IT WILL ALSO RESULT IN

ASSUMPTION OF ALL

LIABILITY BY SAID INSTALLER.

UNPACKING THE UNIT